radiomuseum.org

sony: SRF-M37V - Audio distortion on one channel - repair

Moderadores:
Martin Renz Ernst Erb Vincent de Franco Martin Bösch Mark Hippenstiel Bernhard Nagel Dietmar Rudolph Otmar Jung Heribert Jung Eilert Menke 
 
Por favor haga click en la caja azul de información para leer más acerca de esta página.
Foro » Radios etc. » MODELOS DEMONSTRADOS » sony: SRF-M37V - Audio distortion on one channel - repair
           
Jose Mesquita
Jose Mesquita
 
P  Artículos: 52
Esquemas: 600
Fotos: 1689
02.Jun.21 22:22
Respuesta  |  Usted no ha entrado su «login».(Invitado)   1

This unit developed high distortion and low volume on one of the audio channels.

Checking the audio signal at the stereo volume potentiometer revealed normal levels at the IC2 LA4535M  pins 2 and 4.

So, I have ordered a LA4535M IC and replaced the old one with a fresh component.

As I am not living at my usual place I do not have accesss to my workshop. Try to use a regular soldering iron to solder a mini SMD component legs over a fragile PCB that can not stand heat without destroying the ultra mini copper traces.After some effort I managed to get all the IC legs soldered to the PCB and without any shorts between them.

The offending component, semi destroyed during the removal procedure due to the use of improper tools:

The new IC2 installed and working on both audio channels:

  
rmXorg