Solid State Stereo Receiver AA-6200

Akai Electric Co., Ltd.; Tokyo

  • Jahr
  • 1968 ?
  • Kategorie
  • Rundfunkempfänger (Radio - oder Tuner nach WW2)
  • Radiomuseum.org ID
  • 336490

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • Superhet allgemein
  • Wellenbereiche
  • Mittelwelle und UKW (FM).
  • Betriebsart / Volt
  • Wechselstromspeisung / 50Hz, 220 or 50-60Hz; 100-120; 200-240 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Solid State Stereo Receiver AA-6200 - Akai Electric Co., Ltd.; Tokyo
  • Form
  • Regalgerät wie HiFi-Komponente für Bücherwand.
  • Abmessungen (BHT)
  • 445 x 133 x 340 mm / 17.5 x 5.2 x 13.4 inch
  • Bemerkung
  • Akai AA-6200 all Silicon Transistorized Solid State FM/AM Multiplex Stereo Tuner-Amplifier with Two Integrated Circuits.

    Outstanding Features:

    • FM and AM Sections - Ceramic Filters for better selectivity.
    • Field Effect Transistor front end for extra sensitivity
    • FM Center Tuning and FM/AM Signal Strength Meter
    • Stereo Indicator Lamp
    • 4-Stage FM IF Amplifier
    • AM Bar Antenna
    • 2 AC Outlets for extra convenience
    • 40 W Music Power
    • Tape Monitor and Stereo/Mono Switches
    • Loudness Control
    • Bass, Treble, and Balance Controls
    • Headphone and DIN Jacks
    • Universal Voltage Selector

    Specifications

    FM Tuner Section

    • Frequency Range:  88 to 108 MHz
    • Sensitivity (IHF):  2,5 µV
    • Signal-to-Noise Ratio:  better than 60 dB
    • Stereo Separation:  better than 33 dB
    • Selectivity: better than 60 dB

    AM Tuner Section

    • Frequency Range:  535 to 1605 kHz
    • Sensitivity (IHF):  25 µV at 1 MHz
    • Signal-to-Noise Ratio:  better than 50 dB
    • Selectivity:  better than 20 dB

    Amplifier Section

    • Frequency Response:  20 Hz to 50,000 Hz (-3 dB)
    • Output Power:  40 W at 4 Ω ; 15 W at 8 Ω
    • Harmonic Distortion:  0,2%
    • Input Sensitivity:
    • Phono :  3 mV
    • Aux, Tape:  150 mV
    • Signal-to-Noise Ratio: 
    • Phono:  better than 60 dB
    • Aux, Tape:  better than 70 dB

    Power requirement

    • 50-60 Hz; 100-120; 200-240 V, with additional AC outlets
    • 50 Hz; 220 V (approved by Skandinavian countries)
  • Nettogewicht
  • 8.4 kg / 18 lb 8 oz (18.502 lb)
  • Autor
  • Modellseite von Klaus Rohlfing angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum