AWA Heterodyne Calibrator 7A8407
Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- Paese
- Australia
- Produttore / Marca
- Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- Anno
- 1942 ?
- Categoria
- Strumento da laboratorio
- Radiomuseum.org ID
- 300418
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di tubi
- 6
- Principio generale
- 2 Stadi BF
- Gamme d'onda
- Gamme d'onda nelle note.
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 220; 240; 260 Volt
- Altoparlante
- - Per cuffie o amplificatori esterni
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: AWA Heterodyne Calibrator 7A8407 - Amalgamated Wireless
- Forma
- Soprammobile con qualsiasi forma (non saputo).
- Dimensioni (LxAxP)
- 14 x 9 x 8 inch / 356 x 229 x 203 mm
- Annotazioni
-
This instrument is intended primarily for the calibration of an oscillator by beating it with the fundamental or harmonic of a second calibrated oscillator or the internal crystal oscillator. Two internal crystals can be used; 2 and 5 MHz. An external crystal can be used. The useable range of the calibrator is from approximately 200 kHz to 300 MHz.
This model differs from the otherwise similar 8A8407 in the following ways:
AWA nameplate.
HMV type D4020A connectors.
6 kΩ output impedance.
Grey painted finish.
- Peso netto
- 23 lb (23 lb 0 oz) / 10.442 kg
- Letteratura / Schemi (1)
- - - Manufacturers Literature
- Autore
- Modello inviato da Stuart Irwin. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 1437 modelli, di cui 882 con immagini e 466 con schemi.
Elenco delle radio e altri apparecchi della Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney