Bullet Reverb PR 241

Fender Electric Instrument Co.; Fullerton (CA)

Data
Forum
Pictures
Collections

  • Year
  • 2010 ??
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 363529

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 230 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 8 inch = 20.3 cm
  • Power out
  • 15 W (unknown quality)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Bullet Reverb PR 241 - Fender Electric Instrument Co.
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 340 x 320 x 180 mm / 13.4 x 12.6 x 7.1 inch
  • Notes

  • INPUT IMPEDANCE: Greater than 1 Meg Ohm

    NOMINAL INPUT LEVEL: 100 mV

    POWER OUTPUT: 15 Watts R.M.S.

    RATED LOAD IMPEDANCE: 8 Ohms

    POWER REQUIREMENTS: 120V VERSION: 120 VAC 60 Hz., .28A Max.

    230V VERSION: 230 VAC 50 Hz., .14A Max.

    SPEAKER COMPLEMENT: One 8 Ohm Special Design 8” Speaker (P/N 025421)

    DIMENSIONS: Height: 12-3/8” (31.4cm)

    Width: 13-1/4” (33.7cm)

    Depth: 7-1/8’ (18.1cm)

    WEIGHT: 15lbs. (6.8kg)

    Made in USA or Mexico

  • Net weight (2.2 lb = 1 kg)
  • 6.8 kg / 14 lb 15.6 oz (14.978 lb)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Frontman Amp Reference and Owner's Manual, Fender, P/N 050728)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Bullet Amp Type: PR241 Owner's Manual, Fender, P/N 041526)
  • Author
  • Model page created by Francisco Martins. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Bullet Reverb is part of the collections of the following members.

 Forum