Herald RP10
Hacker Radio Ltd., Maidenhead
- Produttore / Marca
- Hacker Radio Ltd., Maidenhead
- Anno
- 1960–1963
- Categoria
- Radio (o sintonizzatore del dopoguerra WW2)
- Radiomuseum.org ID
- 79491
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di transistor
- 7
- Semiconduttori
- Principio generale
- Supereterodina (in generale); ZF/IF 470 kHz
- Gamme d'onda
- Onde medie (OM) e onde lunghe (OL).
- Tensioni di funzionamento
- Batterie a secco / 2 x 9 Volt
- Altoparlante
- AP magnetodinamico ellittico (magnete permanente e bobina mobile). / Ø 8 inch = 20.3 cm
- Potenza d'uscita
- 1 W (qualità ignota)
- Materiali
- Pelle / stoffa / plastica ma con altro materiale sottostante
- Radiomuseum.org
- Modello: Herald RP10 - Hacker Radio Ltd., Maidenhead
- Forma
- Apparecchio portatile > 20 cm (senza la necessità di una rete)
- Dimensioni (LxAxP)
- 12 x 8.5 x 4.5 inch / 305 x 216 x 114 mm
- Annotazioni
-
The Herald seven-transistor portable receiver. Interesting features of this are a specially-loaded large (8" x 5") loudspeaker, a one-watt push-pull output, and three-position tone control.
Sockets are provided for an external aerial for use in a car and for connecting a microphone for using the receiver as a Baby Alarm.Up to s/n 20000 Ediswan transistors fitted.
April 1962 s/n 20001 onwards chassis revised, Transistors: 3 x AF117, OC71, OC81D 2 x OC81.
- Peso netto
- 2 kg / 4 lb 6.5 oz (4.405 lb)
- Bibliografia
- Wireless World (The), London (WW, 79) (Sep 1960, Page 442.)
- Letteratura / Schemi (1)
- -- Original-techn. papers.
- Autore
- Modello inviato da Juan Antonio Pardo-Alonso. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 56 modelli, di cui 56 con immagini e 23 con schemi.
Elenco delle radio e altri apparecchi della Hacker Radio Ltd., Maidenhead
Collezioni
Il modello Herald fa parte delle collezioni dei seguenti membri.
Discussioni nel forum su questo modello: Hacker Radio Ltd.,: Herald RP10
Argomenti: 1 | Articoli: 1
Hi can you tell me where the 6 pins from the amp board go to I'm attempting to use the amp from a RP10 to repair a RP 38a I know the position on the RP38 (their printed on the board) but on the RP10 there's only numbers 1 to 6
Eddie Stevenson, 04.Aug.20