2 Band Radio Receiver RF-26/A

Irradio; Milano

  • Year
  • 1990 ??
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 361757

 Technical Specifications

  • Number of Transistors
  • 1
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Power type and voltage
  • Line / Batteries (any type) / 220 / C: 4 x 1,5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 9 cm = 3.5 inch
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: 2 Band Radio Receiver RF-26/A - Irradio; Milano
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 250 x 132 x 60 mm / 9.8 x 5.2 x 2.4 inch
  • Notes
  • Coverage FM 88 - 108 MHz and MW 530 - 1600 kHz.

    Frontally, the scale on the right, horizontally, with a red power diode above; on the left the speaker grille. On the upper side, two linear selectors, for choosing the range and for high/low tone. On the right side, tuning knob and on/off wheel - volume and, below, earphone socket; on the left side, socket for the mains cable. Behind, the access to the battery compartment and, at the top, the telescopic antenna, with full rotation, external at rest, 5 sections, 62.5 cm.

    Inside, 7 cm ferrite; 1.5 W speaker.

    Rigid handle, completely in plastic, with full excursion and round crosspiece.

    Measurements taken taking into account the protrusions and in the absence of piles.

     

  • Net weight (2.2 lb = 1 kg)
  • 0.760 kg / 1 lb 10.8 oz (1.674 lb)
  • Author
  • Model page created by Felice Nicolini. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model 2 Band Radio Receiver is part of the collections of the following members.

 Forum