Integrated Amplifier PM-50

A 2 x 70 watt stereo integrated amplifier with LDPS (Linear Drive Power Supply), a low impedance wide bandwidth power supply which ensures tonal and dynamic fidelity into difficult loudspeaker loads. Input sockets for Phono (MM/ MC), CD, Tuner, Aux2, and Aux1, input/output sockets for 2 Tape recorders and terminals for two pairs of loudspeakers (System 1, System 2). On the front, push buttons for Power, Speakers (1, 2), Source Direct, Tape 1, Tape 2 and Mono, rotary controls for Bass, Treble, Volume and Balance, and a rotary Input Selector switch (Phono MC, Phono MM, CD, Tuner, Aux1, Aux2). Jack for headphones.

Specification
Power Output per channel .............:  70 watts rms into 8Ω (1kHz 0.06% THD)
                                                        :  105 watts rms into 4Ω (1kHz 0.06% THD)
Total Harmonic Distortion at 8Ω .....:  0.008%
Intermodulation Distortion ..............:  0.008%
Damping Factor 8Ω ........................:  100
Input Sensitivity/Impedance :
  (at 1kHz)                  MM ..............:  2.5mV/47kΩ
                                   MC ..............:  250µV/100Ω
                                   Line .............:  150mV/33kΩ
Frequency Response Line..............:  10Hz - 70kHz
Signal to Noise ratio   MM...............:  86dB
   (A Weighted)           Line .............:  86dB
Tape Output Level .........................:  300mV (Phono (MM) 5mV 1kHz input)
Tape Output Impedance (Phono) ..:  220Ω
Channel separation .......................:  65dB (CD input at 10 kHz)
Power Consumption ......................:  300 watts

Version Suffix/Power Requirements
2 Voltage version
220-240 V AC 50-60Hz Internally switchable
4 Voltage version
110/120/220/240 V AC 50-60Hz with Voltage Selector

Vous pourrez trouver sous ce lien 571 modèles d'appareils, 563 avec des images et 92 avec des schémas.
Tous les appareils de Marantz (Sound United LLC); Vista, CA