Stereophonic Receiver 2216

Marantz (Sound United LLC); Vista, CA

  • Anno
  • 1977 ??
  • Categoria
  • Radio (o sintonizzatore del dopoguerra WW2)
  • Radiomuseum.org ID
  • 209489

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Principio generale
  • Supereterodina (in generale)
  • Gamme d'onda
  • Onde medie (OM) e MF (FM).
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 220 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 32 W (qualità ignota)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Stereophonic Receiver 2216 - Marantz Sound United LLC;
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 440 x 137 x 293 mm / 17.3 x 5.4 x 11.5 inch
  • Annotazioni
  • Am/FM Stereo Receiver, 2x 16 Watt.
    Inputs: Tape, Phono MM, Aux.
    FM muting, High filter, Bass and Treble Control, Tuning Meter.
  • Peso netto
  • 12 kg / 26 lb 6.9 oz (26.432 lb)
  • Prezzo nel primo anno
  • 240.00 $
  • Autore
  • Modello inviato da Franz Scharner. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Stereophonic Receiver fa parte delle collezioni dei seguenti membri.

 Forum

Discussioni nel forum su questo modello: Marantz Sound United: Stereophonic Receiver 2216

Argomenti: 1 | Articoli: 5

I have just rebuilt a Marantz 2216 receiver. After the rebuild I noted the receiver's FM reception sounded 'bright'.

The FM stereo demodulator is a Hitachi HA1156W, for which I found the original datasheet and application notes online. The recommended de-emphasis is achieved by loading the channel outputs with a resistor and capacitor in parallel shunted to audio reference (i.e. the (+) or (-) rail).

For for 50μS the recommended load is 3k9Ω in parallel with 0.012μF, as shown in the application notes.

For some unnknown reason Marantz used 0.0039μF capacitors in the 2216 deemphasis circuit, which produces a time constant of 15μS, not the 50μS required for most countries or the 75μS for USA. This results in a rising frequency response and bright sound.

Not having any 0.012μF capacitors to hand, I shunted C311 & C312 with 0.0082μF capacitors on the underside of the circuit board. This corrects the high frequency response.

John Matheson, 27.Mar.21

Weitere Posts (5) zu diesem Thema.