• Jahr
  • 1960 ??
  • Kategorie
  • Rundfunkempfänger (Radio - oder Tuner nach WW2)
  • Radiomuseum.org ID
  • 120896

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 18
  • Hauptprinzip
  • Superhet allgemein
  • Wellenbereiche
  • Langwelle, Mittelwelle und mehrere Kurzwellen-Bänder.
  • Betriebsart / Volt
  • Wechselstromspeisung / 40-80 Hz, 115-230 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Mimco Dynatron 2235 - Marconi Co. Marconiphone,
  • Form
  • Tischgerät-gross, - Querformat (breiter als hoch oder quadratisch).
  • Abmessungen (BHT)
  • 25.5 x 19 x 13.5 inch / 648 x 483 x 343 mm
  • Bemerkung
  • Mimco all-wave marine broadcast receiver.

    A receiver designed especially for use in all classes of sea-going vessels, from passenger liners to trawlers, so that broadcast programs may be received and relayed to different parts of the ship, has been introduced by The Marconi International Marine Communication Company, Marconi House, Chelmsford, Essex.

    The receiver, which is known as the Mimco, consists of a Dynatron manufactured sensitive 9-valve superheterodyne receiver and an audio power amplifier. The receiver unit is common to all installations, but the power amplifier is chosen according to the number of loudspeakers employed. A 10-watt unit suffices for small installations with up to 10 extension speakers and these and the receiver can be housed in a single cabinet measuring 251 x 19 x 131 in and weighing 90 lb.

    Short, medium, and long waves are covered in four bands, their respective tuning ranges being 10 to 32 metres, 30 to 85 metres, 180 to 570 metres and 800 to 2,000 metres.

    A tuned RF stage is employed, also variable bandwidth in the IF amplifier, the five switch positions corresponding to 5-, 10-, 15- and 20-kc/s bandwidth. There is a tone control.

    The receiver takes 95 watts from AC mains of either 115 V or 230 V of 40 to 80 c/s.
    If required, a converter can be supplied for operation on 110 or 220 V DC.

    Receiver T139

    • V1 EM34
    • V2 Z77-EF91-6AM6
    • V3 W77-EF92-6F21
    • V4 X79-6AE8-51
    • V5 L77-EC90-CV133
    • V6 Z77
    • V7 W77
    • V8 DH77-EBC90-6AT6
    • V9 Z729
    • V10 W77
    • V11 EM34

    Pre-Amplifier 1181C

    • 6BR7-8D5-CV2135

    AC Power Supply LF512A

    • V201 Z77
    • V202 Z77
    • V203 6V6G
    • V204 6V6G
    • V205 KT66
    • V206 5V4G

     

  • Nettogewicht
  • 90 lb (90 lb 0 oz) / 40.860 kg
  • Datenherkunft
  • -- Collector info (Sammler)
  • Literaturnachweis
  • -- Original prospect or advert (Wireless World Aug 1953, Page 370.)
  • Autor
  • Modellseite von Martin Bösch angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Mimco Dynatron befindet sich in den Sammlungen folgender Mitglieder.

 Forum