Monitor Series Stereo Amplifier 3100 Power Envelope

NAD, New Acoustic Dimension; Ontario

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1988
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 310021

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 100 or 120 or 220 or 240 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 100 W (140 W max.)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Monitor Series Stereo Amplifier 3100 Power Envelope - NAD, New Acoustic Dimension;
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 435 x 108 x 381 mm / 17.1 x 4.3 x 15 inch
  • Annotazioni

  • A 2 x 50 watt stereo hi-fi integrated amplifier with Soft Clipping circuit. The pre and power sections are joined by removable external jumpers that allow you to insert external processors such as a surround-sound unit or an external crossover for bi-amping in the signal path. Input sockets for Phono (MM or MC), Tuner, CD and Video Sound, input/output sockets for 2 Tapes, switches for Infrasonic Filter (On/Off), MM/MC Selector, Soft Clipping (On/Off), Bridging (On/Off) and Speaker Impedance (8Ω/4Ω), and Pre-out/Main-in sockets fitted with removable connectors. Binding posts for two pairs of loudspeakers and two AC outlets (not all models). Rotary controls for Bass, Treble and Volume/Balance, push buttons for Power, Speakers A/B, Bass EQ, Loudness, input selection (Phono, Video, CD, Tuner), Mono and Low Level. Switches for Tape Copy and Tape Monitor. Status indicators for Protection and Soft Clipping. Jack for headphones.

    Specification
    Continuous Average Power Output into 8Ω
    (Min. RMS power per channel, 20Hz - 20kHz, both channels driven
    with no more than the rated distortion) ....:  50 watts
    Rated Distortion (THD 20Hz - 20kHz) .....:  0.03%
    Clipping Power .....................................:  70 watts (max. continuous power per channel)
    IHF Dynamic Headroom at 8Ω ...............:  +6dB
    IHF Dynamic Power (Max. short term) ....:  200 W (8Ω), 250 W (4Ω), 330 W (2Ω)
    Damping Factor ....................................:  100
    Frequency Response ............................:  4Hz - 100kHz
    Signal to Noise Ratio, A Weighted ..........:  100dB (ref. 1W), 117dB (ref. 50W)
    Input Impedance ...................................:  47kΩ (MM), 100Ω (MC), 50kΩ (line)
    Input Sensitivity ....................................:  2.5mV (MM), 0.025mV (MC), 150mV (line)

    Versions/Power Requirements
    USA Canada   100 or 120 V AC 60Hz
    Europe            220 or 240 V AC 50Hz

    Made in Taiwan

  • Peso netto
  • 10.5 kg / 23 lb 2 oz (23.128 lb)
  • Bibliografia
  • - - Manufacturers Literature (NAD 3100 Brochure)
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature (Service Manual for the NAD 3100 Integrated Amplifier dated 1988)
  • Autore
  • Modello inviato da Howard Craven. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum