Export 38
Paillard AG; St. Croix
- País
- Suiza
- Fabricante / Marca
- Paillard AG; St. Croix
- Año
- 1938/1939
- Categoría
- Radio - o Sintonizador pasado WW2
- Radiomuseum.org ID
- 130578
Nov 2023 Njuskalo Nr 33970878
Nov 2023 Njuskalo Nr 33970878
Nov 2023 Njuskalo Nr 33970878
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 5
- Principio principal
- Superheterodino en general; ZF/IF 440 kHz; 2 Etapas de AF
- Número de circuitos sintonía
- 6 Circuíto(s) AM
- Gama de ondas
- OM, OL y OC
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 110; 125; 145; 220; 250 Volt
- Altavoz
- Altavoz electrodinámico (bobina de campo)
- Material
- Metálico
- de Radiomuseum.org
- Modelo: Export 38 - Paillard AG; St. Croix
- Ancho, altura, profundidad
- 385 x 215 x 170 mm / 15.2 x 8.5 x 6.7 inch
- Anotaciones
- Dieses Modell "Export" (38) entstand auf Grund eines Gerätes aus der Republik Slowkei (Slovakia) in sehr schlechtem Zustand. Klar erkennbarwar aber, dass es sich um das gleiche Chassis wie beim 38TR handelt. Die Wellenbereiche sind LW 800 - 1970 m, MW 200-560 m und KW 17,5 - 51 m. In Ermangelung eines besseren Bildes haben wir die uns zugestellten genommen. Unterlagen für das Modell 38TR haben wir von Januar 1938. Modell 28TR und 38TR können demnach schon im Weihnachtsgeschäft 1937 auf dem Markt gewesen sein, doch haben wir keine Beweise dafür. Mallory-Zelle für die Gittervorspannung ist zu beachten!
- Peso neto
- 8.6 kg / 18 lb 15.1 oz (18.943 lb)
- Ext. procedencia de los datos
- Viktor Cingel, Slovakia
- Autor
- Modelo creado por Ernst Erb. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 549 modelos, 266 con imágenes y 303 con esquemas.
Ir al listado general de Paillard AG; St. Croix
Contribuciones en el Foro acerca de este modelo: Paillard AG; St.: Export 38
Hilos: 1 | Mensajes: 1
Viktor Cingel:
The schema is drawn in the position of SW,
switch up is for MW and down for LW (as in the original set)
Resistance of input winding of power trafo: 48 Ohm, secondar 2x500Ohm.
Resistance of dynamic winding in laudspeaker 2560 Ohm.
I has to repair thickler for SW: 5 windings, and tuned SW winding (8 w)in oscillator was cut, so this indicated that during the war someone destroyed SW,
which was at that time done in our countries.
If was tuned for 420Khz, in a very good conditions, so I did not touched it.
The input cuircuits as well oscillatro were tuned as described on dial.
The grill damaged, but from a fragment which I found in radio, a copy
was done using very similar grill, colored by green pastel.
The knob is made from wood, with iron ring, a replica was done just from wood
and ring is painted.
The schema is drawn in the position of SW,
switch up is for MW and down for LW (as in the original set)
Resistance of input winding of power trafo: 48 Ohm, secondar 2x500Ohm.
Resistance of dynamic winding in laudspeaker 2560 Ohm.
I has to repair thickler for SW: 5 windings, and tuned SW winding (8 w)in oscillator was cut, so this indicated that during the war someone destroyed SW,
which was at that time done in our countries.
If was tuned for 420Khz, in a very good conditions, so I did not touched it.
The input cuircuits as well oscillatro were tuned as described on dial.
The grill damaged, but from a fragment which I found in radio, a copy
was done using very similar grill, colored by green pastel.
The knob is made from wood, with iron ring, a replica was done just from wood
and ring is painted.
Heribert Jung, 11.May.08