CR-10

RCA (RCA Victor Co. Inc.); New York (NY)

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1946 ??
  • Categoria
  • Ricevitore professionale (può includere bande amatoriali)
  • Radiomuseum.org ID
  • 256074
    • alternative name: RCA Manufacturing || Victor Talking Machine

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 9
  • Principio generale
  • Supereterodina con stadio RF; ZF/IF 455 kHz; 1 Stadi BF
  • Gamme d'onda
  • Onde corte (solamente OC)
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 105-125; 210-250 Volt
  • Potenza d'uscita
  • 0.4 W (indistorta)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: CR-10 - RCA RCA Victor Co. Inc.; New
  • Forma
  • Rack
  • Dimensioni (LxAxP)
  • 19 x 7 x 10.25 inch / 483 x 178 x 260 mm
  • Annotazioni

  • The CR-10 was a fixed-frequency communications receiver. It was pre-set on a single frequency in the range between 1.5 and 18 MHz. It was principally designed for ground station installations for the reception of CW and R/T in point to point communication and for reception from aircraft to ground. Five sets of plug-in RF coils were used to cover the tuning range. The operating frequency was controlled by a master oscillator or crystal oscillator.

    CRC-11 Remote Control Unit, Relay and Panel were additional items. They allowed the receiver to be controlled from a distance via a 600Ohm line.

  • Peso netto
  • 32 lb (32 lb 0 oz) / 14.528 kg
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature
  • Autore
  • Modello inviato da Louis Meulstee. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum