CR-10

RCA (RCA Victor Co. Inc.); New York (NY)

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1946 ??
  • Categoría
  • Receptor profesional (puede incluir bandas de aficionados)
  • Radiomuseum.org ID
  • 256074
    • alternative name: RCA Manufacturing || Victor Talking Machine

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 9
  • Principio principal
  • Superheterodino con paso previo de RF; ZF/IF 455 kHz; 1 Etapas de AF
  • Gama de ondas
  • Onda Corta solamente
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 105-125; 210-250 Volt
  • Potencia de salida
  • 0.4 W (undistorted)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: CR-10 - RCA RCA Victor Co. Inc.; New
  • Forma
  • Rack
  • Ancho, altura, profundidad
  • 19 x 7 x 10.25 inch / 483 x 178 x 260 mm
  • Anotaciones

  • The CR-10 was a fixed-frequency communications receiver. It was pre-set on a single frequency in the range between 1.5 and 18 MHz. It was principally designed for ground station installations for the reception of CW and R/T in point to point communication and for reception from aircraft to ground. Five sets of plug-in RF coils were used to cover the tuning range. The operating frequency was controlled by a master oscillator or crystal oscillator.

    CRC-11 Remote Control Unit, Relay and Panel were additional items. They allowed the receiver to be controlled from a distance via a 600Ohm line.

  • Peso neto
  • 32 lb (32 lb 0 oz) / 14.528 kg
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature
  • Autor
  • Modelo creado por Louis Meulstee. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum