Frequenzdekade ND100M

Schomandl KG; München

  • Anno
  • 1969
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 158176
    • Brand: Meto

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Rete / Batterie (ogni tipo) / AC 110; 220 / DC 18-30 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Frequenzdekade ND100M - Schomandl KG; München
  • Forma
  • Soprammobile basso, con andamento orizzontale (grosse dimensioni).
  • Dimensioni (LxAxP)
  • 484 x 194 x 436 mm / 19.1 x 7.6 x 17.2 inch
  • Annotazioni
  • Die Frequenzdekade des Typs ND100M arbeitet im Frequenzbereich von 300 Hz bis 100 MHz und liefert eine Ausgangs-EMK von max. 1 Veff bei einem Innenwiderstand von 50Ω. Die Ausgangsfrequenz ist dekadisch in kleinsten Schritten von 1 Hz einstellbar. Sie wurde auch mit Schrittweiten von 10/100/1000 Hz geliefert. Über Zusatzeinrichtungen sind AM, FM und PM sowie die Wobbelung und eine elektronische Frequenzumschaltung für die Programmierung von Kanalfrequenzen möglich
    Die Abmessungen gelten für das Kastengerät. Der Originalpreis gilt für das Kastengerät mit 10-Hz-Schritten im Jahr 1972.
  • Peso netto
  • 27 kg / 59 lb 7.5 oz (59.471 lb)
  • Prezzo nel primo anno
  • 19,970.00 DM
  • Fonte dei dati
  • -- Original prospect or advert
  • Letteratura / Schemi (1)
  • R&S-Datenblatt 444486 Ausgabe 02/1970
  • Autore
  • Modello inviato da Geert Schulte. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum

Discussioni nel forum su questo modello: Schomandl KG;: Frequenzdekade ND100M

Argomenti: 1 | Articoli: 1

A guest has sent us a contact form with the following question:

Hello sir,
Do you know where to find information on an old type of frequency synthesizers. These were using multiple crystal oscillators, like very old CBs had, to achieve the different channels. Then I think they where using multiple bandpass filters, one for each oscillator, to filter out the signal. They were used on very low phase noise systems but they where quite expensive.
I do not even know what is the name of this technique?

A friend told me that it is like this one but I am not sure
http://www.radiomuseum.org/r/schomandl_frequenzdekade_nd100m.html

Do you have any information and/or schematics on this?
Thanks in advance

 

kostas Giann

Hopefully a member can answer him in the forum.
Maybe we also find more such models ...

 

Ernst Erb, 19.Nov.09

Weitere Posts (1) zu diesem Thema.