|
|
||||
Anno: 1973 ? | Categoria: Strumento da laboratorio |
Gamme d'onda | - senza |
---|---|
Particolarità | |
Tensioni di funzionamento | Batterie a secco / 1.5 & 9 Volt |
Altoparlante | - - Nessuna uscita audio. |
Potenza d'uscita | |
Radiomuseum.org | Modello: Volt-Ohm-Milliammeter 260 Series 6P - Simpson Electric Co.; Chicago, |
Materiali | Bachelite |
Forma | Tascabile (portatile molto piccola), < 20 cm |
Dimensioni (LxAxP) | 5.25 x 7 x 3.125 inch / 133 x 178 x 79 mm |
Annotazioni | Model with overload protection. Seperate fuse/battery cover. -DC/+DC/AC switch. Output connector. Taut Band Suspension. "Adapter lock" for use with "Add-A-Tester" accessories. Rated circuit-to-ground 1000V AC/DC max. Two batteries: 1x Type "D" cell, 1x 9-Volt block. Measuring ranges
DC Volt: Ranges 250mV, 1V, 2.5V, 10V, 25V, 50V, 250V, 1000V; Accuracy 2% of full scale; Sensitivity 20K ohms per volt |
Peso netto | 3 lb 0 oz (3 lb) / 1.362 kg |
Modello inviato da Dirson Willig. Utilizzare "Proponi modifica" per inviare ulteriori dati.
Elenco delle radio e altri apparecchi della Simpson Electric Co.; Chicago, IL - Lac du Flambeau, WI
In questo link sono elencati 138 modelli, di cui 120 con immagini e 56 con schemi.
Visite: 933 Risposte: 2
simpson: Varistor silicon
|
|
Meyer Rochwerger
20.Apr.17 |
1
Dear friends, I am restoring a VOM Simpson 260 series 6. Allegati
|
Nikolaus Löwe
21.Apr.17 |
2
The varistor seems to be a protective device for the meter. Try two standard silicon diodes (like 1N4001) in anti-parallel, that should do the trick. I presume the voltage required across the meter for a full reading is below 0.5V. Nikolaus Löwe |
Meyer Rochwerger
21.Apr.17 |
3
Yes, I know that the varistor is a protective device for the microammeter, and also thought of employing two silicon diodes to replace it. But ... I'm trying to get the varistor in order to preserve the originality of the meter. Thank you for suggesting. Meyer |