CapaciTester CT355
TeleTest Instrument Corp.; N.Y.
- País
- Estados Unidos
- Fabricante / Marca
- TeleTest Instrument Corp.; N.Y.
- Año
- 1956 ??
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 246768
AD from PF Repoter Feb 1956 edition.
- Numero de valvulas
- 2
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 110 Volt
- Altavoz
- - - No hay salida de sonido.
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: CapaciTester CT355 - TeleTest Instrument Corp.; N.Y
- Forma
- Sobremesa de cualquier forma, detalles no conocidos.
- Anotaciones
-
Tester is limited to caps rated at least 150 vdc.
Capacity is .00001 to 50uf.
It has a "5" Function Knob;
1. OFF
2. DYN LEAK & CONTINUITY
3. Capacity LO
4. Capacity M
5. Capacity HI
It has "2" Test Buttons forDYN LEAK & CONTINUITY: "TEST" & "REFERENCE"
- Autor
- Modelo creado por Bill Troyer. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 2 modelos, 2 con imágenes y 0 con esquemas.
Ir al listado general de TeleTest Instrument Corp.; N.Y.
Colecciones
El modelo CapaciTester es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: TeleTest Instrument: CapaciTester CT355
Hilos: 1 | Mensajes: 2
My capacitor tester is a CapaciTester CT355 mfg. by TeleTest Instrument Corp, NY.
Uses one 6AV6, and one 6AF6-G
I cannot find any info on this unit. There is no calibration on this unit.
Test modes seem to be; Dynamic Leakage, Capacity, and Continuity.
Tester is limited to caps rated at least 150 vdc.
Capacity is .00001 to 50uf.
It has a "5" Function Knob;
1. OFF
2. DYN LEAK & CONTINUITY
3. Capacity LO
4. Capacity M
5. Capacity HI
It has "2" Test Buttons forDYN LEAK & CONTINUITY: "TEST" & "REFERENCE"
I have figured out the leakage and the capacity tests, but not sure about the continuity and reference.
There does not seem to be any where to insert a reference cap unless you put it in the continuity position while placing th cap under test in the capacity position.
Any help with info would be greatly appreciated.
Bill Troyer, 06.Jan.14