Solid State AM-FM Stereo Tuner KT-7000

Kenwood, Trio-Kenwood Inc.; Komagane

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1969
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 327398
    • alternative name: Trio Corp.
    • Brand: Jennen

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Superheterodino en general
  • Gama de ondas
  • OM y FM
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110-120; 220-240 Volt
  • Altavoz
  • - Este modelo usa amplificador externo de B.F.
  • Material
  • Materiales diversos
  • de Radiomuseum.org
  • Modelo: Solid State AM-FM Stereo Tuner KT-7000 - Kenwood, Trio-Kenwood Inc.;
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 408 x 134 x 280 mm / 16.1 x 5.3 x 11 inch
  • Anotaciones

  • A hi-fi AM/FM stereo tuner with an analogue dial housed in a metal case with wooden side panels. With Signal and Tuning meters, FM Stereo, Muting and MPX Filter indicators, rotary Tuning and Output Level controls, rotary switches for Power Off/On/FM Muting and Selector (AM, FM Auto, MPX Filter, FM Mono). On the back, an adjustable ferrite rod AM antenna, terminals for AM and FM antennae, RCA phono sockets for Line output for Amplifier and Tape Recorder and for FM Multipath output.

    Specification  
    FM SECTION  
    Usable Sensitivity (IHF) 1.5µV
    Frequency Response 20Hz-15kHz +0dB,-2dB
    Harmonic Distortion (at 400Hz, 100% Mod)
         		 Mono: < 0.3%
    Stereo: < 0.6%
    Signal-to-Noise Ratio (at 100% Mod)
         		 > 70dB at 30µV input
    > 55dB at 5µV input
    Capture Ratio (IHF) 1.3dB
    Image Frequency Rejection (at 100MHz) > 100dB
    Harmonic Spurious Response > 100dB
    IF Rejection Ratio > 100dB
    Selectivity (Alt. Channel, IHF) > 60dB
    Multiplex Carrier Suppression > 50dB
    Stereo Separation
         		 > 35dB, at 1000Hz
    > 25dB, at 10,000Hz
    Output Voltage
    (at 400 Hz, 100% Mod)    		 1.5 Volts
    Antenna Impedance 300Ω balanced, 75Ω unbalanced
    Output Impedance 7000Ω
    Stereo Noise Filter Yes (High Frequency Blend Circuit)
    Interstation Muting Yes
    AM SECTION  
    Sensitivity (IHF)
         		 15µV (Ext. Antenna Terminal)
    100µV/m (Bar Antenna)
    Selectivity > 25dB
    Image Rejection > 80dB
    IF Rejection > 70dB
    Output Voltage
    (at 400 Hz, 30% Mod)    		 0.4 Volt

    Power Requirements:  110-120V/220-240V AC 50/60Hz with voltage selector
    Power Consumption:    20 Watts

  • Peso neto
  • 18 lb 0 oz (18 lb) / 8.172 kg
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Instruction Manual KT-7000 dated 1969-9)
  • Autor
  • Modelo creado por Howard Craven. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum