Trio Solid State AM-FM Stereo Tuner KT-5000

Kenwood, Trio-Kenwood Inc.; Komagane

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1970/1971
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 326055
    • alternative name: Trio Corp.
    • Brand: Jennen

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Superheterodino en general
  • Gama de ondas
  • OM y FM
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110-120; 220-240 Volt
  • Altavoz
  • - Este modelo usa amplificador externo de B.F.
  • Material
  • Materiales diversos
  • de Radiomuseum.org
  • Modelo: Trio Solid State AM-FM Stereo Tuner KT-5000 - Kenwood, Trio-Kenwood Inc.;
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 16.3125 x 5.15625 x 11.03125 inch / 414 x 131 x 280 mm
  • Anotaciones

  • A hi-fi AM/FM stereo tuner with an analogue dial housed in a metal case with wooden side panels. With meters for Signal and FM Tuning, Stereo, FM Muting and MPX Filter   indicators, rotary Tuning and Output Level controls, rotary Selector switch (Power Off, FM Auto, FM Mono, AM),  On/Off switches for FM Muting and MPX Filter. On the rear, an adjustable ferrite stick AM antenna, terminals for FM and AM antenna and Ground, RCA phono sockets for Line Output, Output to Tape recorder, Mono Output and FM Multipath Output.

    SPECIFICATION  
    FM SECTION  
    USABLE SENSITIVITY (IHF) 1.7µV
    FREQUENCY RESPONSE 20Hz to 15,000Hz +0dB,-2dB
    HARMONIC DISTORTION
    (at 400Hz, 100% Mod.)    		 Mono:  Less than 0.6%
    Stereo: Less than 0.9%
    S/N RATIO (at 100% Mod.) Better than 60dB
    CAPTURE RATIO (IHF) 2.5dB
    IMAGE REJECTION (at 100MHz) Better than 90dB
    IF REJECTION Better than 85dB
    ALT. CHANNEL SELECTIVITY Better than 50dB
    STEREO SEPARATION Better than 35dB at 1,000Hz
    OUTPUT VOLTAGE (at 400Hz, 100% Mod.) 1.0 Volt ±1dB
    ANTENNA INPUT IMPEDANCE 300Ω Balanced, 75Ω Unbalanced
    OUTPUT IMPEDANCE 200Ω
    STEREO NOISE FILTER Yes (High Frequency Blend circuit)
    INTER STATION MUTING Yes
    TUNING METER Yes (Center Tuning Type)
    SIGNAL STRENGTH METER Yes
    MECHANICAL IF FILTER Yes
    AM SECTION  
    USABLE SENSITIVITY (IHF} 15µV
    SELECTIVITY Better than 25dB
    IMAGE REJECTION Better than 90dB at 1,000kHz
    OUTPUT VOLTAGE (at 400Hz, 30% Mod.) 0.33V ±1dB

    Voltage requirements
    110-120V, 220-240V AC 50/60Hz with voltage selector

    Power Consumption: 15 Watts

    Same as the Kenwood KT-5000 Solid State AM-FM Stereo Tuner.

  • Peso neto
  • 14 lb 0 oz (14 lb) / 6.356 kg
  • Mencionado en
  • -- Original prospect or advert (1971 Kenwood Stereo Amplifier & Tuner catalogue)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Instruction manual KT-5000 dated 1970)
  • Autor
  • Modelo creado por Howard Craven. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum