Component Bridge B521

Wayne Kerr; New Malden, England

  • Jahr
  • 1960 ?
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 361425

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 3
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 100-125; 200-250 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Component Bridge B521 - Wayne Kerr; New Malden,
  • Form
  • Tischgerät-gross, - Querformat (breiter als hoch oder quadratisch).
  • Abmessungen (BHT)
  • 435 x 295 x 185 mm / 17.1 x 11.6 x 7.3 inch
  • Bemerkung
  • Component Bridge B521

    Has the ability to measure complex impedances over the range 1 milliohm to 1000 megohms whilst still in circuit.

    Accurate to +2%, the B521 is a transformer ratio-arm bridge of advanced design intended for the rapid, direct measurement of virtually all components and networks in research or development laboratories, in the manufacture and servicing of radio, television, and electronic equipment,t and for a variety of industrial applications.

    Employment of the transformer ratio-arm principle— affording 2, 3 or 4 terminal measurements—makes it possible to measure any arm of a delta network in the presence of the other arms. This means, in effect, that even when dealing with a highly complicated electronic chassis, it is no longer necessary, as it is with a conventional Bridge, to unsolder individual components in order to ascertain their true value. This facility is particularly important at a time when the printed circuit is coming into even wider use.

    10 measuring ranges each for:

    • Resistance 1 mΩ to 1000 MΩ
    • Capacitance 1 pF to 5 F
    • Inductance 1 µH to 500 kH
  • Nettogewicht
  • 6.8 kg / 14 lb 15.6 oz (14.978 lb)
  • Literaturnachweis
  • - - Manufacturers Literature
  • Literatur/Schema (1)
  • -- Original prospect or advert (Electronic Engineering Mar 1961, Page 80.)
  • Autor
  • Modellseite von Ulrich Bretz angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Component Bridge befindet sich in den Sammlungen folgender Mitglieder.

 Forum