radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

VT-6

Information - Help 
ID = 17859
       
Country:
United States of America (USA)
Brand: Western Electric Company Inc.; New York (NY)
Developer: Western Electric Company Inc.; New York (NY) 
Tube type:  Transmitting Triode, air cooled   Universal 
Identical to VT-6 = CW-1819 = 212A
First year 1923 Saga of the Vacuum Tube, Tyne page 289-291
Production stop 1924

Base Large 4 pin Bayonet
Was used by Transmittertube (Radio)
Filament Vf 14 Volts / If 6.25 Ampere / Direct / Specified voltage AC/DC
Description

Tyne page 289-291: The experimental Type I tube was the forerunner of the Western Electric tube 212A, rated at 250 watts. Size about 13 5/8 inches high, 3 5/8 in diameter. Used as oscillator or modulator. Filament current 6.24 amperes at 12.5 to 14 volts. Anode 1500 volts for the current of 100-150 milliamperes - with an amplification factor of about 16 at an internal anode impedance of 2000 ohms. Assigned as CW-1819 by the Navy and VT-6 by the Signal Corps.

The 219A was the counterpart for the 212A as a rectifier, starting commercially in 1923 and we assume therefore that the 212A started in the same year. The 212A was replaced in 1924 by the 212D with a new filament for not having to classify for a filament resistance - and that tube lasted - inclusive the counterpart 219D from 1926 into the 1930s.

 
Dimensions (WHD)
incl. pins / tip
x 345 x 92 mm / x 13.58 x 3.62 inch
Weight 744 g / 26.24 oz
Information source Taschenbuch zum Röhren-Codex 1948/49   
Saga of the Vacuum Tube, Tyne   Page 289
Tube Lore (I)
Tube Lore (II)

212d_pin_ass..png VT-6: Fin Stewart
Fin Stewart

 

You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  

Data Compliance More Information