3 Band Receiver ADE2300

Emerson Electronics; Firenze

  • Année
  • 1980 ?
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 360579

 Spécifications techniques

  • No. de transistors
  • 8
  • Principe général
  • Super hétérodyne (en général)
  • Gammes d'ondes
  • PO, GO et FM
  • Tension / type courant
  • Secteur et Piles (tous types). / 220; 120 / AA: 4 x 1,5 Volt
  • Haut-parleur
  • HP dynamique à aimant permanent + bobine mobile / Ø 7.7 cm = 3 inch
  • Matière
  • Plastique moderne (pas de bakélite, ni de catalin)
  • De Radiomuseum.org
  • Modèle: 3 Band Receiver ADE2300 - Emerson Electronics; Firenze
  • Forme
  • Portative > 20 cm (sans nécessité secteur)
  • Dimensions (LHP)
  • 220 x 120 x 60 mm / 8.7 x 4.7 x 2.4 inch
  • Remarques
  • Frontally, on the left, power on/off and volume knob and, below, tone low or high selector switch; on the right, the scale, vertical; a red tuning indicator is located under the scale. On the right side is the tuning knob and on the left side the socket for the power cable. On the upper side, band selector and telescopic antenna, external at rest, rotatable only in one plane, five sections, 63,5 cm. On the rear side, earphone jack, mains voltage selector switch and access to the battery compartment.

    Rigid, partially plastic-coated metal handle with full travel. Made in Singapore.

    The measurements take into account the protrusions and the weighing is without batteries.

    Twin device of the Sanyo 7160UM. The differences are in the front part, with the underlining of the speaker and in the red tuning indicator LED, located at the bottom of the scale.

  • Poids net
  • 0.790 kg / 1 lb 11.8 oz (1.74 lb)
  • Auteur
  • Modèle crée par Felice Nicolini. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle 3 Band Receiver fait partie des collections des membres suivants.

 Forum