- Pays
- Etats-Unis
- Fabricant / Marque
- Katzenstein & Keene, New York, NY, USA
- Année
- 1934 ?
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 85801
- No. de tubes
- 5
- Principe général
- 1 Etage(s) BF
- Gammes d'ondes
- PO et GO
- Tension / type courant
- Appareil tous courants (CA / CC) / 110 Volt
- Haut-parleur
- HP dynamique à électro-aimant (électrodynamique) / Ø 12.7 cm = 5 inch
- Puissance de sortie
- 1 W (qualité inconnue)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: Lucille - Katzenstein & Keene, New York
- Forme
- Modèle de table sans poussoirs, modèle cheminée
- Dimensions (LHP)
- 270 x 190 x 140 mm / 10.6 x 7.5 x 5.5 inch
- Remarques
- Resistance cord.
- Source
- - - Data from my own collection
- Auteur
- Modèle crée par Christian ADAM. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 1 modèles d'appareils, 1 avec des images et 0 avec des schémas.
Tous les appareils de Katzenstein & Keene, New York, NY, USA
Collections
Le modèle Lucille fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: Katzenstein & Keene,: Lucille
Discussions: 1 | Publications: 9
Hi Rmorg, who can dive in and help?
I own this very nice midget radio, Model LUCILLE, from KATZENSTEIN & KEENE, New York, USA
http://www.radiomuseum.org/r/katzen_lucille.html
Today I could repair it, but have replaced the missing power cord with integrated resistor by a 125 Ohms resistor, according to my calculation, for a main voltage of 110V. So my first question: is it still possible to buy a replacement power cord, like the original? If not, who has a solution? On my side, I have integrated the replacement resistor on the chassis. Without the cabinet, every thing is OK, but I am effraid about the additional heat generation when the wood cabinet will be mounted (risk of damage)...
And by the way, does somebody know more about this make? I could find nothing with Google. Has somebody the schematic? The first filtering capacitor was 32µF, the second 16µF, is this OK? (those in place were not the original).
Thanks a lot for sharing info and tricks,
Christian ADAM
Christian ADAM, 25.Mar.07