Stereo Preamplifier 1020B

NAD, New Acoustic Dimension; Ontario

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1985 ?
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 310124

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110 or 120 or 220 or 240 Volt
  • Altavoz
  • - Este modelo usa amplificador externo de B.F.
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Stereo Preamplifier 1020B - NAD, New Acoustic Dimension;
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 420 x 96 x 240 mm / 16.5 x 3.8 x 9.4 inch
  • Anotaciones

  • A hi-fi stereo pre-amplifier similar to the earlier NAD 1020A Stereo Preamplifier.

    With RCA input sockets for Phono (MM or MC), Tuner and Aux, input/output RCA sockets and DIN socket for Tape, a Phono MM/MC selector switch and a phono Capacitance Selector switch (100pF, 200pF, 320pF). Output sockets for Pre-out and High-Level Pre-Out. Some models have three AC outlets and some have a voltage selector.

    Rotary controls for Bass, Treble, Balance and Volume, push buttons for Power, input selection (Aux, Tuner, Phono, Tape), Mono and Loudness. Power On pilot light and jack for headphones. Rack mount handles are an optional extra.

    Specification
    Phono input
    Input impedance/capacitance MM & MC .:  47kΩ / 100, 200 or 320pF
    Input sensitivity, 1kHz ............................:  1.25mV ref. 0.5V ( MM ) 0.09mV (MC)
    Signal/Noise ratio (A-weighted ................:  75dB ref. 5mV (MM)
            with cartridge connected) ...............:  72dB ref. 0.5mV (MC)
    RIAA response accuracy .......................:   ±0.5dB (20Hz-20kHz) (MM)
                                                                    ±0.5dB (50Hz-20kHz) (MC)

    Line level inputs
    Input impedance/Capacitance ................:  20kΩ/ 220pF
    Input sensitivity ref. 0.5V .......................:  80mV
    Signal/Noise ratio (A-weighted ref 0.5V) ..:  94dB
    Frequency response .............................:  ±0.5dB

    Line level outputs
    Output impedance Pre-amp  .................:  600Ω
                               Tape ........................:  Source Z + 1kΩ
                               Phones ...................:  150Ω
    Maximum output level Pre-amp .............:  > 15V
                                    Tape ...................:  > 10V
                                    Phones ...............:  > 5V into 600Ω, > 250mV into 8Ω              

    Versions/Power Requirements
    120 V AC 60Hz
    220 V AC 50 Hz
    240 V AC 50 Hz
    110/120/220/240 V AC 50/60Hz with voltage selector

    Made in Taiwan

  • Peso neto
  • 3.7 kg / 8 lb 2.4 oz (8.15 lb)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (NAD 1020A Stereo Preamplifier Instructions for installation and operation)
  • Documentación / Esquemas (2)
  • - - Manufacturers Literature (NAD 1020B Brochure dated 1985)
  • Autor
  • Modelo creado por Howard Craven. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum