• Año
  • 1946/1947
  • Categoría
  • Receptor profesional (puede incluir bandas de aficionados)
  • Radiomuseum.org ID
  • 87275
    • alternative name: National Toy Co.
    • Brand: Thrillbox

 Especificaciones técnicas

  • Numero de valvulas
  • 11
  • Principio principal
  • Superheterodino con paso previo de RF; ZF/IF 456 kHz; 2 Etapas de AF
  • Número de circuitos sintonía
  • 11 Circuíto(s) AM
  • Gama de ondas
  • OM, OL y más de dos OC
  • Tensión de funcionamiento
  • Alimentado desde otro equipo o aparato principal. / AC 6.3 & DC 240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 1.5 W (unknown quality)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: HRO-5RA-1 - National Company; Cambridge &
  • Forma
  • Boatanchor (militar, profesional >20 kg).
  • Ancho, altura, profundidad
  • 480 x 260 x 300 mm / 18.9 x 10.2 x 11.8 inch
  • Anotaciones
  • Rack version of the latest HRO model HRO-5A1 (HRO Variant 6), with integrated noise limiter (control switch to the left of main tuning), black laquered micrometer dial and round S-meter.

    Coverage 50 kHz - 30 MHz (9 ganged coil sets 50-100 / 100-200 / 180-430 / 480-960 / 900-2050 kHz / 1,7-4 / 3,5-7,3 / 7-14,4 / 14-30 MHz, shortwave coils delivered with bandspread in HAM bands).

    Modes AM / CW/SSB (BFO).

    The 0 – 500 epicyclic readout dial allows for continuous analog tuning while digitally indicating incremental progress over a range of ten full turns of the large tuning knob that tunes with velvet smoothness. Ten times the circumference of the dial is nearly 4 meters on a normal dial scale, which delivers great frequency resolution. The dial is not calibrated to directly indicate a frequency but a frequency calibration chart is necessary to determine the correct operation frequency.

    HRO model variant 6 with all knobs with metal skirts (selectivity control in right upper corner and new noise limiter control left of main dial both also with metal skirt), round metal labels around AVC and B+ switches, black micrometer dial and rectangular S-meter, S-meter toggle switch; printed metal calibration charts on coilsets. Rectangular IF filter shielding cans.

    Rack type power supply SPU-697 as standard, can also be operated from  "dog house" type power supply PSU 697 (filaments 6.3 V AC, B+ 240 V DC) used as standard.

  • Peso neto
  • 16.5 kg / 36 lb 5.5 oz (36.344 lb)
  • Autor
  • Modelo creado por Martin Bösch. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum