Radiochassis 2005 Stereo B and D
REMA, Fabrik für Rundfunk, Elektrotechnik und Mechanik, Stollberg (Ostd.)
- Pays
- Allemagne
- Fabricant / Marque
- REMA, Fabrik für Rundfunk, Elektrotechnik und Mechanik, Stollberg (Ostd.)
- Année
- 1965–1968
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 148481
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 9
- Principe général
- Super hétérodyne (en général); FI/IF 460/10700 kHz
- Circuits accordés
- 6 Circuits MA (AM) 10 Circuits MF (FM)
- Gammes d'ondes
- PO, GO, plus que 2 x OC et FM
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110; 127; 220; 240 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Puissance de sortie
- 7 W (qualité inconnue)
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Radiochassis 2005 Stereo B and D - REMA, Fabrik für Rundfunk,
- Forme
- Chassis (pour intégration dans meuble)
- Dimensions (LHP)
- 500 x 190 x 280 mm / 19.7 x 7.5 x 11 inch
- Remarques
-
Einbauchassis für den Export zum Einbau in Musikmöbel verschiedener Hersteller.
Anschlussbuchsen für TA, TB, Lautsprecher links und rechts, getrennte Einstellung für AM/FM und Höhen/Tiefen.
Ausführung B: 2x KW, MW, LW, UKW bis 104 MHz, Ferritantenne;
Ausführung D: 3x KW, MW, UKW bis 108 MHz, Ferritantenne.
- Littérature
- Service-DVD Funkverlag B. Hein
- Schémathèque (1)
- -- Original-techn. papers. (Serviceunterlagen)
- Auteur
- Modèle crée par Keith Dobson. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 162 modèles d'appareils, 136 avec des images et 121 avec des schémas.
Tous les appareils de REMA, Fabrik für Rundfunk, Elektrotechnik und Mechanik, Stollberg (Ostd.)
Collections
Le modèle Radiochassis fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: REMA, Fabrik für: Radiochassis 2005 Stereo B and D
Discussions: 1 | Publications: 12
I am replacing the mains power cable on this set. As is normal, the original cable does not include a ground/earth wire. I would like to connect the ground/earth wire that is in the replacement cable, to the set. This is mainly for audio reasons, and also safety reasons. I am in the UK where earth is standard on mains power sockets.
I have some years experience with audio and electrical wiring, but am not familiar with vintage equipment from the DDR, and thought this may be a good thing to check with the wise folks of the RadioMuseum.
My questions are:
1 Is this likely to be a good/safe idea?
2 If so, What is the best place to connect it to? Do I simply make a really strong connection to a solid part of the radio's metal chassis?
3 I would also like to do the common hi-fi practise of connecting the earthing cable (NOT the audio cable screen) from another peice of audio, a turntable, to the same connection point on the radio. Is this likely to be a good/safe idea?
4 Are there any capacitors, or anything else, that should be discharged, or otherwise made safe, before handling/soldering the power connections?
5 Is it best to wait some time after disconnecting the power plug, before working on it?
It's great to make my first post on RadioMuseum - I'm very glad to see there's no such thing as a stupid question!
Keith Dobson, 24.Feb.09