Ravensbrook Stereo Amplifier

Rogers, Catford (see also Rogers Birmingham)

  • Year
  • 1969
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 287316

 Technical Specifications

  • Number of Transistors
  • 19
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 110; 125; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 30 W (unknown quality)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Ravensbrook Stereo Amplifier - Rogers, Catford see also
  • Shape
  • Tablemodel, low profile (big size).
  • Dimensions (WHD)
  • 365 x 127 x 250 mm / 14.4 x 5 x 9.8 inch
  • Notes
  • Stereo amplifier, 2 x 15 watts into 8ohms, 2 x 10 watts into 15ohms.

    Available without its teak cabinet for building in.

    Controls for volume, filter slope, treble, bass, balance and high/low pass filters

    Dual disc sensitivity switch provide 4 alternative input sensitivities for different cartridge types

    Sockets :

    Disc Input      3 pin DIN

    Tuner Input    3 pin DIN

    Tape (on back)  5 pin DIN

    Tape (on front)  5 pin DIN

    Speaker outputs 2 pin DIN x2

    Superceded by the Mark 2 model with headphone socket and additional aux input

  • Net weight (2.2 lb = 1 kg)
  • 11.75 lb (11 lb 12 oz) / 5.335 kg
  • Literature/Schematics (1)
  • - - Manufacturers Literature
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Ravensbrook Stereo Amplifier is part of the collections of the following members.

 Forum