Rolls Cygnet RCP Early Version
Rolls (brand), Stevens and Sons Limited; Christchurch
- Country
- New Zealand-Aotearoa
- Manufacturer / Brand
- Rolls (brand), Stevens and Sons Limited; Christchurch
- Year
- 1955
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 367487
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 5
- Main principle
- Superheterodyne (common); 2 AF stage(s)
- Tuned circuits
- 6 AM circuit(s)
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- Alternating Current supply (AC) / 50 Hz, 230 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5 inch = 12.7 cm
- Material
- Bakelite or Plastics (type unknown)
- from Radiomuseum.org
- Model: Rolls Cygnet RCP [Early Version] - Rolls brand, Stevens and Sons
- Shape
- Tablemodel without push buttons, Mantel/Midget/Compact up to 14
- Dimensions (WHD)
- 305 x 178 x 152 mm / 12 x 7 x 6 inch
- Notes
-
Rolls Radio RCP Cygnet
5-valve broadcast superhet. This is an early version of the Cygnet model using an EAF41 diode pentode valve - see valve label picture. Other early models are said to use the EAF42 valve. The EAF41 can be replaced by the EAF42; for this purpose, a bridge from g3 to k must be soldered.
Early: ECH21, EF22, EAF41, EBL21, 6X4 or ECH21, EF22, EAF42, EBL21, 6X4
Common: ECH42, EF41, EBC41, EL41, 6X4
Last: ECH81, EF89, EBC81, EL84, 6X4Manufactured by Radio (1936) Ltd for Stevens & Sons Ltd.
See also Ultimate RCP.
- Author
- Model page created by Brian Stevens. See "Data change" for further contributors.
- Other Models
-
Here you find 24 models, 21 with images and 23 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Rolls (brand), Stevens and Sons Limited; Christchurch