• Anno
  • 1944 ?
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 156847

 Specifiche tecniche

  • Numero di tubi
  • 1
  • Numero di transistor
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Rete / Batterie di accumulatori (eventualmente anche le batterie) / 240 / 6 & 3 x 1.5 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile in legno
  • Radiomuseum.org
  • Modello: Tranpro 862 - Transmission Products Pty. Ltd
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 280 x 283 x 202 mm / 11 x 11.1 x 8 inch
  • Annotazioni
  • This is a combined valve emission tester and multimeter.  It has:

    Four resistance ranges plus leakage testing for paper and electrolytic capacitors;

    Four voltage ranges, AC, DC and output, 10, 100, 250 and 1000 V fsd.

    Four DC current ranges, 1, 10, 100 and 250 mA fsd.

    Valve emission testing: The main instrument has eight valve sockets.  Additionally, the lid contains a plug in socket board with provision for up to an extra 15 sockets.

    The instrument can be powered from the AC mains or from a 6 volt accumulator.  It uses a vibrator for 6 volt operation.  Three "D" cells are required for the lowest ohms range.

    This instrument resembles the Palec VCT externally, even down to the control and switch positions but the internal construction and circuitry are not the same.

     

  • Peso netto
  • 10 kg / 22 lb 0.4 oz (22.026 lb)
  • Autore
  • Modello inviato da un iscritto da A. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Tranpro fa parte delle collezioni dei seguenti membri.

 Forum