radiomuseum.org

 
Please click your language flag. Bitte Sprachflagge klicken.
  The thread rating is reflecting the best post rating. Have you rated this thread (best post)?

Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960

Moderators:
Ernst Erb Otmar Jung 
 
Please click the blue info button to read more about this page.
Papers » Tubes and valves (history, technique etc.) » Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960
           
Joe Sousa
Joe Sousa
Editor
USA  Articles: 647
Schem.: 187
Pict.: 394
12.Oct.11 05:07
 
Count of Thanks: 31
Reply  |  You aren't logged in. (Guest)   1

Fellow Radiophiles:

RM member Dmitri Faguet and I have finished the English translation of the first Russian Rod Tube article that appeared in the popular electronics hobby press in the Soviet Union. This article was originally published in Russian in "Radio" magazine 1960 issue no. 7 pp34-38.

See the attached pdf file.

The original issue in Russian can be found in djvu format at Radio no7 1960 Russian.

The benefits of beam focus to keep current out of the screen grid rods are explained. Partition noise is thus reduced by over 2x, and so is wasted current on the screen grid to less than 10% of the anode current. The most efficient of the rod tubes, the 1j24b, only wastes 2% of the Anode current on the screen grid rods.

Best Regards,

-Joe

Attachments:

This article was edited 12.Oct.11 16:21 by Joe Sousa .

  
rmXorg