radiomuseum.org
 
  L'évaluation de la conversation est celle du meilleur message. Avez vous évalué cette conversation ?

Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960

Modérateurs:
Ernst Erb Otmar Jung 
 
Cliquez sur le bouton d'information bleu pour en apprendre plus sur cette page.
Documents » Tubes et lampes » Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960
           
Joe Sousa
Joe Sousa
Rédacteur
USA  Articles: 661
Schémas: 200
Images: 418
12.Oct.11 05:07
 
Remerciements: 16
Répondre  |  Vous n'êtes pas connecté, mais en mode visiteur   1

Fellow Radiophiles:

RM member Dmitri Faguet and I have finished the English translation of the first Russian Rod Tube article that appeared in the popular electronics hobby press in the Soviet Union. This article was originally published in Russian in "Radio" magazine 1960 issue no. 7 pp34-38.

See the attached pdf file.

The original issue in Russian can be found in djvu format at Radio no7 1960 Russian.

The benefits of beam focus to keep current out of the screen grid rods are explained. Partition noise is thus reduced by over 2x, and so is wasted current on the screen grid to less than 10% of the anode current. The most efficient of the rod tubes, the 1j24b, only wastes 2% of the Anode current on the screen grid rods.

Best Regards,

-Joe

Pièces jointes:

Cet article a été édité 12.Oct.11 16:21 par Joe Sousa .

  
rmXorg