radiomuseum.org
 
  Die Bewertung des Threads entspricht der besten Post-Bewertung. Haben Sie schon einen Post hier bewertet?

Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960

Moderatoren:
Ernst Erb Otmar Jung 
 
Bitte klicken Sie ganz oben rechts das blaue Info-Zeichen, um Instruktionen/Hilfe zu erhalten.
Texte » Röhren als Basis++, Röhrengeschichte/Röhrentechnik » Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960
           
Joe Sousa
Joe Sousa
Redakteur
USA  Beiträge: 661
Schema: 200
Bilder: 418
12.Oct.11 05:07
 
Anzahl Danke: 16
Antworten  |  Sie sind nicht eingeloggt (Gast).   1

Fellow Radiophiles:

RM member Dmitri Faguet and I have finished the English translation of the first Russian Rod Tube article that appeared in the popular electronics hobby press in the Soviet Union. This article was originally published in Russian in "Radio" magazine 1960 issue no. 7 pp34-38.

See the attached pdf file.

The original issue in Russian can be found in djvu format at Radio no7 1960 Russian.

The benefits of beam focus to keep current out of the screen grid rods are explained. Partition noise is thus reduced by over 2x, and so is wasted current on the screen grid to less than 10% of the anode current. The most efficient of the rod tubes, the 1j24b, only wastes 2% of the Anode current on the screen grid rods.

Best Regards,

-Joe

Anlagen:

Dieser Beitrag wurde am 12.Oct.11 16:21 von Joe Sousa editiert.

  
rmXorg