Satellit Transistor 5000
|
|
||||
|
anderer Name
|
Grundig Portugal || Grundig USA / Lextronix | ||||
|---|---|---|---|---|---|
| Jahr: 1964–1966 | Kategorie: Rundfunkempfänger (Radio - oder Tuner nach WW2) | ||||
| Halbleiter (Zählung nur für Transistoren) | 17: |
| Hauptprinzip | Super mit HF-Vorstufe; ZF/IF 460 kHz |
|---|---|
| Anzahl Kreise | 9 Kreis(e) AM |
| Wellenbereiche | Langwelle, Mittelwelle, mehrere Kurzwellenbänder plus UKW (FM). |
| Spezialitäten | |
| Betriebsart / Volt | Akku und/oder Batterie / 6x1,5 Volt |
| Lautsprecher | 2 Lautsprecher |
| Belastbarkeit / Leistung | 2 W (Qualität unbekannt) |
| von Radiomuseum.org | Modell: Satellit Transistor 5000 - Grundig Radio-Vertrieb, RVF, |
| Material | Diverses Material |
| Form | Reisegerät > 20 cm (netzunabhängig betreibbar) |
| Abmessungen (BHT) | 410 x 250 x 120 mm / 16.1 x 9.8 x 4.7 inch |
| Bemerkung | Exportversion des Satellit 205, lediglich andere Skala und andere Typenbezeichnung. Klangregler, AFC, KW-Lupe, Bandspreizung Netzgerät TN12. 10 KW Bereiche. |
| Nettogewicht | 7 kg / 15 lb 6.7 oz (15.419 lb) |
| Literatur/Schema (1) | -- Original-techn. papers. |
Modellseite von Arpad Roth † 27.3.17 angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
Alle gelisteten Radios usw. von Grundig (Radio-Vertrieb, RVF, Radiowerke)
Hier finden Sie 6076 Modelle, davon 5299 mit Bildern und 4093 mit Schaltbildern.
|
Klicks: 1069 Antworten: 2
grundig: Radio works FM/UKW but not on AM/MW
|
|
|
Omer Suleimanagich
15.Apr.17 |
1
Radio only is working on FM mode. My question is, I understand that zener diodes and sometimes varistors are used, is this a zener diode issue? Also, I would like to replace ALL the zener diodes in this radio, but I don know what values |
|
Michael Watterson
15.Apr.17 |
2
Why replace zener diodes? They are rarely ever faulty in battery equipment. If it works on any SW band, then suspect a connection to the ferrite stick loop aerial. See first is AM IF working. |
|
Omer Suleimanagich
16.Apr.17 |
3
This unit is battery and ac Grundig, during the sixties had many different models that needed zener diodes replaced in their transistor units (from my own experiance) |
|
Klicks: 3544 Antworten: 2
grundig: my grundig satellit transistor 5000 sensitivity is poor
|
|
|
Chou Chiang-ping
28.May.11 |
1
my grundig satellit 5000 radio sensitivity is poor finally i find c501 15nf is shorted,cause the af126i transistor base bias is too low change capacitor then work normal
i have a question ? why this radio volume is on min position but the audio hiss noise is a little high? |
|
Marc Gianella
30.May.11 |
2
Dear Mr. Chiang-ping
Your post ist obviously linked to a wrong model (Grundig Musikgeraet 2550 ID=26074 instead of Grundig Satellit Transistor 5000 ID=71126) Concerning your question, I would suggest to have a look at the AF stages. I had a similar problem with a Grundig RTV900a. One of the audio channels had a disturbing hiss which could not be controlled by the volume. All Tensions in the circuitry were ok. After changing the AF pre-stage, the hiss had gone.
Kind regards |
|
Vincent de Franco
31.Jan.12 |
3
The discussion has been moved to the right GRUNDIG Model... |
|
Klicks: 8615 Antworten: 5
grundig: Transistor 5000; Satellit 205 or 205A?
|
|
|
Mike Izycky
15.Jun.05 |
1
In my collection I have three examples of this radio, all of which are described as a "Transistor 5000" on the plate over the control knobs. There are however subtle differences between one of the radios and the others, and I wonder if this is the difference between a "Satellit 205" and a "Satellit 205 A" ? I am hoping that a Satellit expert can help... The differences are: - one model says "Satellit" on the lower edge of the dial whilst the others say "Transistor 5000". - This also has station names on Medium waveband, FM channel numbers and "Rundspruch I - VI" marked on the LW scale. - The dial and switches are marked U, K4 - K1, M and L on this set, but FM, S4 - S1, M and L on the others. - One is marked in MHz, the other in MC/s. - The "Satellit" does not have a removable window over the KW/SW drum, the others do. - The back on the "Satellit" is held in place by one screw into the plastic chassis moulding, whilst on the other model it is held by two screws into the metal chassis. I did wonder if some models were intended for the Americas rather than Europe/UK? |
|
Hans M. Knoll
17.Jun.05 |
2
Hallo Mr. Izycky
The Sat 205 was the first "Satellit" from GRUNDIG. First Sat.205 for Germany and TR 5000 for the USA Market. On the different Drawing Numbers "1141-62" and " 9141-62" you can see, there was two version topical in 1964.
After 1965 are new Version on Top. " Sat 205a" and "Transistor 5000a" The Audio Module is change on the "a" versions. First ( the 205) use on input- stage a AC151r low noise pnp germanium Trans. The "a" use a BC108 A or BSY 76b, this is a NPN Silicon Trans. The circuit must be changed to realice this. Also the Number of the Module My own set, on of the first model, has on the Dial glass from TUNER, one screw to fix the glass. Best regards from Hans M. Knoll
|
|
Mike Izycky
21.Jun.05 |
3
Hello Herr Knoll, Thank you for taking the time to reply to my question. Today I opened up the two radios in question and indeed there are differences as you describe - on the radio I assumed to be the "A" model there is a BC108A transistor on the audio module, and on the earlier radio there is the AC151r transistor. If I remember correctly, this earlier radio was purchased from eBay (Germany), the other two were purchased here in England which might explain the presence of the "Satellit" name. So it would seem that there were improvements to the exterior design as well as the electronics when the "A" models were released: I only have the service documents for the 205A/Tr.5000A. So now I shall endeavour to restore the "original" Satellit 205. One thing now interests me: what is the meaning of the markings "Rundspr. I - VI" on the Long Waveband? Thank you again for your help! Kind regards, Mike Izycky. |
|
Hans M. Knoll
21.Jun.05 |
4
Hallo Mr. Izycky, Your next question: Schweizer Telephon Rundspruch, is a Longwave Broadcasting Service on the 600 Ohms Telephon -line. Instead Frequency in kc, Channel Nr.are used . "I , II, III etc. On RM.org you can find many Articles abaud this. See here: http://www.radiomuseum.org/dsp_forum_post.cfm?thread_id=6773#post6771 and particular here: http://www.biennophone.ch/ Best regards Hans M. Knoll |
|
Ruben Garcia Bayon
18.Feb.14 |
5
I see on www classic-worldband.com that the SAT 205A is the amateur version, and so comes with the SSB module integrated in the back.
|
|
Hans M. Knoll
18.Feb.14 |
6
Hello. if you look here, you can find these complet Information.
Remarks: The Version Sat 205a is not the same as Sat 205A . Knoll Anlagen
|
Ende Forumsbeiträge zum Modell
