Delmonico 1007W hard-wired AC cord

Körting-Radio; Leipzig, später Grassau

  • Año
  • 1957 ??
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 117896
    • alternative name: Dietz & Ritter GmbH, Dr.

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 7
  • Principio principal
  • Superheterodino en general; Modelo de Exportacion
  • Número de circuitos sintonía
  • 6 Circuíto(s) AM     10 Circuíto(s) FM
  • Gama de ondas
  • OM, OC y FM
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 117 Volt
  • Altavoz
  • 2 Altavoces
  • Material
  • Bakelita
  • de Radiomuseum.org
  • Modelo: Delmonico 1007W [hard-wired AC cord] - Körting-Radio; Leipzig, später
  • Forma
  • Sobremesa de botonera.
  • Ancho, altura, profundidad
  • 14.2 x 9.6 x 7.8 inch / 361 x 244 x 198 mm
  • Anotaciones
  • US export model, english labeled. Imported by Delmonico, NY.
    FM: 88 - 108 MHz, SW: ~6 - 18 MHz, AM-MW
    Tuning indicator tube, ferrite rod antenna, bass & treble controls, phono in, ext. speaker terminal, terminals for built-in dipole antenna or ext. antennas, made in Germany.

    The model 1007W is labeled "1007W" on both back cover and chassis. The mains lead emerges at the lower left corner of the back cover.

    See Korting 1007 for the model with a mains socket fixed on the back cover.
  • Peso neto
  • 5.8 kg / 12 lb 12.4 oz (12.775 lb)
  • Procedencia de los datos
  • - - Data from my own collection
  • Autor
  • Modelo creado por Richard Greenwood. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Delmonico es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Körting-Radio;: Delmonico 1007W

Hilos: 1 | Mensajes: 2

Radio friends,

I'm servicing a Körting 1007 for someone.  The radio is now working very well, but the dial lighting is very poor.  The dial lamp is mounted on top of the chassis, a bit behind the dial, without any direct light path to most of the dial.

Did this radio originally have some kind of reflective shroud to chanel the light into the dial area?  Or is this simply a poor design that always has very dim lighting of the dial?

As it is now, the upper red pointer is barely visible, and the lower green pointer is virtually impossible to see.

Tom

P.S.:  On a different subject, the original type EM85 eye tube seems to be impossible to find, but I'm having good results with an EM81/6DA5 with the socket rewired.

Thomas Albrecht, 01.Apr.10

Weitere Posts (2) zu diesem Thema.