Luna-Phono-Stereo 4736W

Loewe-(Opta); Deutschland

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1959/1960
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 22128
    • alternative name: Löwe Radio

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 8
  • Principio principal
  • Superheterodino en general; ZF/IF 460 kHz
  • Número de circuitos sintonía
  • 6 Circuíto(s) AM     10 Circuíto(s) FM
  • Gama de ondas
  • OM, OL, OC y FM
  • Especialidades
  • Tocadiscos-autom o no-no sabemos
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110; 127; 160; 220 Volt
  • Altavoz
  • Altavoz elíptico de imán permanente.
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Luna-Phono-Stereo 4736W - Loewe-Opta; Deutschland
  • Forma
  • Sobremesa de botonera.
  • Ancho, altura, profundidad
  • 560 x 370 x 340 mm / 22 x 14.6 x 13.4 inch
  • Anotaciones
  • Phono: PE Typ 3430 Stereo, 16/33/45/78 UpM.
  • Peso neto
  • 15 kg / 33 lb 0.6 oz (33.04 lb)
  • Precio durante el primer año
  • 475.00 DM
  • Ext. procedencia de los datos
  • Erb

 Colecciones | Museos | Literatura

Colecciones

El modelo Luna-Phono-Stereo es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Loewe-Opta;: Luna-Phono-Stereo 4736W

Hilos: 2 | Mensajes: 5

Dear Alfred Zeeb!

I compared the different kinds of Chassis, that you were asking for.

By the Model 4736 the boards of HF/ZF and NF are in line.

The Model 5751,with other tubes, has similary boards, but parallel.

I would say, you have the cabinet from the 4736W and a chassis of the model 5751W.

It often happened, that manufactors changed parts or, like in this case, a complet module, when parts are missing and the marketing had to go on.

Its possible, that other members have further informations.

Regards

Hans-W.Ellerbrock

Hans-Werner Ellerbrock, 11.Jul.13

Weitere Posts (1) zu diesem Thema.

Some time ago I bought a Loewe-Opta "Luna-Phono-Stereo 4736W". It's cabinet has the dimensions of the 4736W, the rear panel describes it as a 4736W and the "Bestueckungsplan" (inside rear panel) lists the correct tube complement for the 4736W. There is even a stamp on the chassis designating it clearly as a 4736W. See pictures:

Markings on the dial glass are "BSB 4731-01 00-6". The serial number as per a paper sticker on the chassis is "36 12162".

However, the tubes actually installed are ECC85, ECH81, EBF89, ECC83, EM84 and 2x EL84 as used in the successor model "Luna-Phono-Stereo 5751W". Also, in all other respects the circuitry is that of the 5751W.

Do I have a 4736W with futuristic innards or a shrunken (only 1 speaker) 5751W?

Is ist conceivable that at model change time Loewe-Opta was stuck with leftover 4736W cabinets and decided to stuff them with the next generation chassis?

What should be more important in classifying this (or any other) radio: Properties of the cabinet or those of the electronics?

Thanks for any thoughts on this.

 

Alfred Zeeb † 8.6.22, 11.May.07

Weitere Posts (4) zu diesem Thema.