- Pays
- Allemagne
- Fabricant / Marque
- Lumophon, Bruckner & Stark, Nürnberg
- Année
- 1939/1940
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 3386
-
- Brand: Lumeta
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 5
- Principe général
- Super hétérodyne (en général); FI/IF 468 kHz
- Circuits accordés
- 7 Circuits MA (AM)
- Gammes d'ondes
- PO, GO et OC
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110-240 Volt
- Haut-parleur
- HP dynamique à électro-aimant (électrodynamique)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: WD507 - Lumophon, Bruckner & Stark,
- Forme
- Modèle de table profil bas (grand modèle).
- Dimensions (LHP)
- 630 x 322 x 335 mm / 24.8 x 12.7 x 13.2 inch
- Remarques
- variable Bandbreite; Rheinland=ZF 473 kHz.
- Poids net
- 17 kg / 37 lb 7.1 oz (37.445 lb)
- Prix de mise sur le marché
- 248.00 RM
- Source
- Handbuch WDRG 1939 / Radiokatalog Band 1, Ernst Erb
- Source du schéma
- Lange+Schenk+FS-Röhrenbestückung
- Index des illustrations
- Das Modell ist im «Radiokatalog» (Erb) abgebildet.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 303 modèles d'appareils, 255 avec des images et 201 avec des schémas.
Tous les appareils de Lumophon, Bruckner & Stark, Nürnberg
Contributions du forum pour ce modèle: Lumophon, Bruckner &: WD507
Discussions: 1 | Publications: 2
Hi,
If someone could help me with the hum in supply circuit in wd 507?
Problem: After turning on the radio, great hum voltage appears on "Feld" coil. The hum voltage is about 20 - 30 Vpp. The supply voltage on cathod of az11 drops below 180 V. New tubes were applied, but the problem was the same. All passive elements in supply unit and around of el12 are ok. The hum is very loud in speaker.
We tried to replace capacitor 0,2 uF parallel to feld coil with 220 uF and the hum was gone and the supply voltage (cathode az11) was below 160 V (which is not enough to supply el12).
Question: What is the maximum hum voltage (peak to peak) allowed in supply circuit of wd 507?
Thank you,
Nikola
Nikola Matkovic, 18.Jun.10