371A; Philips Electrical, (ID = 266230) Radio
371A; Philips Electrical, (ID = 265573) Radio
371A; Philips Electrical, (ID = 266231) Radio
371A; Philips Electrical, (ID = 266232) Radio
371A; Philips Electrical, (ID = 266386) Radio
371A; Philips Electrical, (ID = 1801857) Radio 371A; Philips Electrical, (ID = 490573) Radio
371A; Philips Electrical, (ID = 490575) Radio 371A; Philips Electrical, (ID = 490576) Radio
371A; Philips Electrical, (ID = 228737) Radio 371A; Philips Electrical, (ID = 228738) Radio
371A; Philips Electrical, (ID = 228739) Radio 371A; Philips Electrical, (ID = 228740) Radio
371A; Philips Electrical, (ID = 228741) Radio 371A; Philips Electrical, (ID = 228742) Radio
Use red slider bar for more.
371A; Philips Electrical, (ID = 1801857) Radio
Philips Electrical,: 371A [Radio] ID = 1801857 933x700
Select picture or schematic to display from thumbnails on the right and click for download.
For model 371A, Philips Electrical, Lamps, Industrial - Miniwatt; London
Country:  Great Britain (UK)
Manufacturer / Brand:  Philips Electrical, Lamps, Industrial - Miniwatt; London
Year: 1947 Category: Broadcast Receiver - or past WW2 Tuner
Valves / Tubes 5: ECH35 EF39 EBC33 EL33 AZ31
Main principle Superheterodyne (common); ZF/IF 470 kHz
Wave bands Broadcast, Long Wave and Short Wave.
Power type and voltage Alternating Current supply (AC) / 110-260 Volt
Loudspeaker Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5 inch = 12.7 cm
Power out
from Model: 371A - Philips Electrical, Lamps,
Material Bakelite case
Shape Tablemodel, low profile (big size).
Dimensions (WHD) 16.5 x 9.25 x 8.25 inch / 419 x 235 x 210 mm
Notes power consumption: 42.5 watts
Source of data -- Collector info (Sammler)

Model page created by Bruno Gandolfo-Canepa. See "Data change" for further contributors.

All listed radios etc. from Philips Electrical, Lamps, Industrial - Miniwatt; London
Here you find 413 models, 279 with images and 279 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.


Forum contributions about this model
Philips Electrical,: 371A
Threads: 1 | Posts: 6
Hits: 2434     Replies: 5
philips: 371A ;
Bruce Cohen

I have got one of those Philips 371A/15.

They seem to be British Made. Some of them seem to have a Philips-Symbol on the left side, and some not.

Does anyone know, how this came about?



Howard Craven


Hello Bruce,

The Philips 371As (and 371Us) should all have a badge on the left hand front, Trouble is, they tend to fall off, indeed the badge was missing from my 371A when I acquired it but luckily I managed to find a replacement. It is the same metal badge fitted to many other 1940s Philips sets built in Europe.

Regards ..........Howard



Bruce Cohen

Thank you, Howard

I thought, they might have run out of it because of the times in the forties ;)

I have to look for a replacement then, one finds copies of the badges in Holland, it will be one of those.


Thanks again!

Bruce Cohen

Come to think, Howard, what kind of glue did they use at that time? I cannot spot any residu on the bakelite, and I would expect to see that (see picture in the collection of the radiomuseum). No hole either ... Do you have a picture of your radio, before you fitted the emblem?

Nowadays there are glues that stick as hell - were those available at the time? (Maybe not, you might say, for all the emblems fell off, hihi...)


Howard Craven


Hello Bruce

Here's a pic of my Philips 371A without its badge, there was no glue residue  .....

 I don't know what glue was originally used, but it wasn't very good !

And here is the correct badge for this set, in need of a bit of touch-up paint .....

I used a spot of superglue to stick it on.

Regards ............ Howard

PS: The white paint around the inside rims of the two front knobs is incorrect and has since been removed.




Bruce Cohen

A real bauty it is!

With or without badge...

Thank you

Philips Electrical,: 371A
End of forum contributions about this model