371A; Philips Electrical, (ID = 266230) Radio
371A; Philips Electrical, (ID = 265573) Radio
371A; Philips Electrical, (ID = 266231) Radio
371A; Philips Electrical, (ID = 266232) Radio
371A; Philips Electrical, (ID = 266386) Radio
371A; Philips Electrical, (ID = 1801857) Radio 371A; Philips Electrical, (ID = 490573) Radio
371A; Philips Electrical, (ID = 490575) Radio 371A; Philips Electrical, (ID = 490576) Radio
371A; Philips Electrical, (ID = 228737) Radio 371A; Philips Electrical, (ID = 228738) Radio
371A; Philips Electrical, (ID = 228739) Radio 371A; Philips Electrical, (ID = 228740) Radio
371A; Philips Electrical, (ID = 228741) Radio 371A; Philips Electrical, (ID = 228742) Radio
Utilisez la barre de défilement rouge.
371A; Philips Electrical, (ID = 1801857) Radio
Philips Electrical,: 371A [Radio] ID = 1801857 933x700
Sélectionnez une image/schéma pour afficher des vignettes sur la droite et cliquez pour télécharger.
Pour le modèle 371A, Philips Electrical, Lamps, Industrial - Miniwatt; London
Pays:  Royaume Uni
Fabricant / Marque:  Philips Electrical, Lamps, Industrial - Miniwatt; London
Année: 1947 Catégorie: Radio - ou tuner d'après la guerre 1939-45
Lampes / Tubes 5: ECH35 EF39 EBC33 EL33 AZ31
Principe général Super hétérodyne (en général); FI/IF 470 kHz
Gammes d'ondes OM (PO), OL (GO) et OC.
Tension / type courant Alimentation Courant Alternatif (CA). / 110-260 Volt
Haut-parleur HP dynamique à aimant permanent (bobine mobile) / Ø 5 inch = 12.7 cm
Puissance de sortie
De Modèle: 371A - Philips Electrical, Lamps,
Matière Boitier en bakélite
Forme Modèle de table, profil bas (grand modèle).
Dimensions (LHP) 16.5 x 9.25 x 8.25 inch / 419 x 235 x 210 mm
Remarques power consumption: 42.5 watts
Source -- Collector info (Sammler)

Modèle crée par Bruno Gandolfo-Canepa. Voir les propositions de modification pour les contributeurs supplémentaires.

Tous les appareils de Philips Electrical, Lamps, Industrial - Miniwatt; London
Vous pourrez trouver sous ce lien 413 modèles d'appareils, 279 avec des images et 279 avec des schémas.


Contributions du forum pour ce modèle
Philips Electrical,: 371A
Discussions: 1 | Publications: 6
Vus: 2434     Répondre: 5
philips: 371A ;
Bruce Cohen

I have got one of those Philips 371A/15.

They seem to be British Made. Some of them seem to have a Philips-Symbol on the left side, and some not.

Does anyone know, how this came about?



Howard Craven


Hello Bruce,

The Philips 371As (and 371Us) should all have a badge on the left hand front, Trouble is, they tend to fall off, indeed the badge was missing from my 371A when I acquired it but luckily I managed to find a replacement. It is the same metal badge fitted to many other 1940s Philips sets built in Europe.

Regards ..........Howard



Bruce Cohen

Thank you, Howard

I thought, they might have run out of it because of the times in the forties ;)

I have to look for a replacement then, one finds copies of the badges in Holland, it will be one of those.


Thanks again!

Bruce Cohen

Come to think, Howard, what kind of glue did they use at that time? I cannot spot any residu on the bakelite, and I would expect to see that (see picture in the collection of the radiomuseum). No hole either ... Do you have a picture of your radio, before you fitted the emblem?

Nowadays there are glues that stick as hell - were those available at the time? (Maybe not, you might say, for all the emblems fell off, hihi...)


Howard Craven


Hello Bruce

Here's a pic of my Philips 371A without its badge, there was no glue residue  .....

 I don't know what glue was originally used, but it wasn't very good !

And here is the correct badge for this set, in need of a bit of touch-up paint .....

I used a spot of superglue to stick it on.

Regards ............ Howard

PS: The white paint around the inside rims of the two front knobs is incorrect and has since been removed.




Bruce Cohen

A real bauty it is!

With or without badge...

Thank you

Philips Electrical,: 371A
Fin des contributions forum pour ce modèle