371A; Philips Electrical, (ID = 266230) Radio
371A; Philips Electrical, (ID = 265573) Radio
371A; Philips Electrical, (ID = 266231) Radio
371A; Philips Electrical, (ID = 266232) Radio
371A; Philips Electrical, (ID = 266386) Radio
371A; Philips Electrical, (ID = 1801857) Radio 371A; Philips Electrical, (ID = 490573) Radio
371A; Philips Electrical, (ID = 490575) Radio 371A; Philips Electrical, (ID = 490576) Radio
371A; Philips Electrical, (ID = 228737) Radio 371A; Philips Electrical, (ID = 228738) Radio
371A; Philips Electrical, (ID = 228739) Radio 371A; Philips Electrical, (ID = 228740) Radio
371A; Philips Electrical, (ID = 228741) Radio 371A; Philips Electrical, (ID = 228742) Radio
Utilice la barra deslizante rojo por más.
371A; Philips Electrical, (ID = 1801857) Radio
Philips Electrical,: 371A [Radio] ID = 1801857 933x700
Seleccione una imagen o esquema para mostrar las miniaturas de la derecha y haga clic para descargar.
For model 371A, Philips Electrical, Lamps, Industrial - Miniwatt; London
País:  Gran Bretaña (GB)
Fabricante / Marca:  Philips Electrical, Lamps, Industrial - Miniwatt; London
Año: 1947 Categoría: Radio - o Sintonizador pasado WW2
Válvulas 5: ECH35 EF39 EBC33 EL33 AZ31
Principio principal Superheterodino en general; ZF/IF 470 kHz
Gama de ondas OM, OL y OC
Tensión de funcionamiento Red: Corriente alterna (CA, Inglés = AC) / 110-260 Volt
Altavoz Altavoz dinámico (de imán permanente) / Ø 5 inch = 12.7 cm
Potencia de salida
de Modelo: 371A - Philips Electrical, Lamps,
Material Bakelita
Forma Sobremesa apaisado (tamaño grande).
Ancho, altura, profundidad 16.5 x 9.25 x 8.25 inch / 419 x 235 x 210 mm
Anotaciones power consumption: 42.5 watts
Procedencia de los datos -- Collector info (Sammler)

Modelo creado por Bruno Gandolfo-Canepa. Ver en "Modificar Ficha" los participantes posteriores.

Ir al listado general de Philips Electrical, Lamps, Industrial - Miniwatt; London
Donde encontrará 413 modelos, 279 con imágenes y 279 con esquemas.


Contribuciones en el Foro acerca de este modelo
Philips Electrical,: 371A
Hilos: 1 | Mensajes: 6
Entradas: 2434     Réplicas: 5
philips: 371A ;
Bruce Cohen

I have got one of those Philips 371A/15.

They seem to be British Made. Some of them seem to have a Philips-Symbol on the left side, and some not.

Does anyone know, how this came about?



Howard Craven


Hello Bruce,

The Philips 371As (and 371Us) should all have a badge on the left hand front, Trouble is, they tend to fall off, indeed the badge was missing from my 371A when I acquired it but luckily I managed to find a replacement. It is the same metal badge fitted to many other 1940s Philips sets built in Europe.

Regards ..........Howard



Bruce Cohen

Thank you, Howard

I thought, they might have run out of it because of the times in the forties ;)

I have to look for a replacement then, one finds copies of the badges in Holland, it will be one of those.


Thanks again!

Bruce Cohen

Come to think, Howard, what kind of glue did they use at that time? I cannot spot any residu on the bakelite, and I would expect to see that (see picture in the collection of the radiomuseum). No hole either ... Do you have a picture of your radio, before you fitted the emblem?

Nowadays there are glues that stick as hell - were those available at the time? (Maybe not, you might say, for all the emblems fell off, hihi...)


Howard Craven


Hello Bruce

Here's a pic of my Philips 371A without its badge, there was no glue residue  .....

 I don't know what glue was originally used, but it wasn't very good !

And here is the correct badge for this set, in need of a bit of touch-up paint .....

I used a spot of superglue to stick it on.

Regards ............ Howard

PS: The white paint around the inside rims of the two front knobs is incorrect and has since been removed.




Bruce Cohen

A real bauty it is!

With or without badge...

Thank you

Philips Electrical,: 371A
Fin de las contribuciones al foro de modelo