- Country
- Spain
- Manufacturer / Brand
- Philips Ibérica, COPRESA, Compañía de Productos Electrónicos, Miniwatt tubes, SELEZ; Madrid, Barcelona
- Year
- 1952/1953
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 81407
Quelle: Juan Miguel Salom
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 5
- Main principle
- Superheterodyne (common); ZF/IF 452 kHz; 2 AF stage(s)
- Wave bands
- Broadcast plus 2 Short Wave bands.
- Power type and voltage
- Alternating Current supply (AC) / 90; 110; 125; 150 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 16 cm = 6.3 inch
- Material
- Bakelite case
- from Radiomuseum.org
- Model: BE-321-A - Philips Ibérica, COPRESA,
- Shape
- Tablemodel without push buttons, Mantel/Midget/Compact up to 14
- Dimensions (WHD)
- 380 x 240 x 190 mm / 15 x 9.4 x 7.5 inch
- Net weight (2.2 lb = 1 kg)
- 4 kg / 8 lb 13 oz (8.811 lb)
- Literature/Schematics (1)
- -- Original-techn. papers.
- Author
- Model page created by Juan Antonio Pardo-Alonso. See "Data change" for further contributors.
- Other Models
-
Here you find 638 models, 532 with images and 469 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Philips Ibérica, COPRESA, Compañía de Productos Electrónicos, Miniwatt tubes, SELEZ; Madrid, Barcelona
Collections
The model is part of the collections of the following members.
Forum contributions about this model: Philips Ibérica,: BE-321-A
Threads: 1 | Posts: 1
En este modelo el transformador del altavoz tiene un defecto en las soldaduras, por lo que el primario aparece abierto, repasando a fondo las soldaduras queda reparado. También el condensador de sintonia tiene le lengueta de contacto de las placas con poca presión con lo que falla intermitentemente.
F. Quintana-Calduch, 23.Nov.09