Wildbad 125
|
|
||||
|
Brand
|
Schwer & Söhne, GmbH | ||||
|---|---|---|---|---|---|
| Year: 1960/1961 | Category: Broadcast Receiver - or past WW2 Tuner | ||||
| Valves / Tubes | 6: ECC85 ECH81 EF89 EABC80 EM84 EL84 |
| Main principle | Superheterodyne (common); ZF/IF 460 kHz |
|---|---|
| Tuned circuits | 6 AM circuit(s) 9 FM circuit(s) |
| Wave bands | Broadcast, Long Wave, Short Wave plus FM or UHF. |
| Details | |
| Power type and voltage | Alternating Current supply (AC) / 110-220 Volt |
| Loudspeaker | 4 Loudspeakers |
| Power out | 4 W (unknown quality) |
| from Radiomuseum.org | Model: Wildbad 125 - SABA; Villingen |
| Material | Wooden case |
| Shape | Tablemodel with Push Buttons. |
| Dimensions (WHD) | 590 x 375 x 255 mm / 23.2 x 14.8 x 10 inch |
| Notes | Lautsprecher: 2 x Tiefton (oval) 18 x 24 cm; 2 x Hoch-Mittelton 11 cm. |
| Net weight (2.2 lb = 1 kg) | 12.3 kg / 27 lb 1.5 oz (27.093 lb) |
| Price in first year of sale | 369.00 DM |
| External source of data | Erb |
| Source of data | HdB d.Rdf-& Ferns-GrH 1960/61 |
All listed radios etc. from SABA; Villingen
Here you find 1598 models, 1445 with images and 1097 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
|
Hits: 1176 Replies: 1
saba: SABA Wildbad 125 - sprache-music switch
|
|
|
John Fedak
01.Jul.16 |
1
Need help - my Saba works very well, with one exception -The switch over from sprache/music is ot working. it stays in music mode. Is it a mechanical problem or is it an electrical problem? I think it is electrical, however I am not sure. Would some one help me on this issue? Thank you, Viellen Dank, John Fedak |
|
Henning Oelkers
10.Jul.16 |
2
Hi, John, Saba has a special Switch Behavior on some Models. If You push the Switch slowly downwards, you schould hear a click, short before reaching the max travel. if You leave the Button, it schould stay in the lower position. If You push further down, the Switch is released again, and then moves back to the up position. Many People just push the Button all the way down, which initiates a release and the Button didn't stay in the lower position. maybe this helps, Best Regards, Henning |
End of forum contributions about this model
