• Année
  • 1955
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 75689
    • alternative name: Grundig Portugal || Grundig USA / Lextronix

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 5
  • No. de transistors
  • Principe général
  • Super hétérodyne (en général); FI/IF 468 kHz; 2 Etage(s) BF; Modèle pour exporter
  • Circuits accordés
  • 6 Circuits MA (AM)
  • Gammes d'ondes
  • PO et plus que 2 x OC
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110, 125, 150, 225 Volt
  • Haut-parleur
  • HP dynamique oval à aimant permanent / Ø 17 cm = 6.7 inch
  • Matière
  • Boitier en bakélite
  • De Radiomuseum.org
  • Modèle: 2045WZX - Grundig Radio-Vertrieb, RVF,
  • Forme
  • Modèle de table avec boutons poussoirs.
  • Dimensions (LHP)
  • 552 x 360 x 238 mm / 21.7 x 14.2 x 9.4 inch
  • Remarques
  • Tropicalized, fly-wheel tuning, separately variable bass and treble, controls with visual indications on scale; sockets provided for gramophone pick-up connection and extension loudspeaker. To 6 volt car battery by means of additional vibrator, automatic switch by connection of the vibrator. Rectifier: one metal. SWI: 2-6 MHz SWII: 5,9- 11,5 MHz, SWIII: 11,3-17,5 MHz, SWIV: 17,3-26,5 MHz
  • Source
  • -- Original prospect or advert
  • Schémathèque (1)
  • -- Original-techn. papers.
  • Auteur
  • Modèle crée par Carlos A. Pieroni-García. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum

Contributions du forum pour ce modèle: Grundig Radio-: 2045WZX

Discussions: 1 | Publications: 2

i have studied the schematic for the grundig 2045WZX, and i noticed that the unearthed lead of the filament of the em85 magic eye tube is not connected to the 6.3 volt ac supply, but rather it is connected to one of the leads of the high voltage winding of the power transformer. i cannot believe this could be correct, as it would place a high voltage across the filament which would destroy it instantly.

my question: is the connection i refer to above correct?

i ask the question as i have recently acquired a grundig 2054WZX radio which is missing its power transformer and i plan to restore it.

regards

 

basim bulos

Basim Bulos, 16.Feb.10

Weitere Posts (2) zu diesem Thema.