Majestic 4006U Export
- Manufacturer / Brand
- Grundig (Radio-Vertrieb, RVF, Radiowerke)
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- alternative name: Grundig Portugal || Grundig USA / Lextronix
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- Main principle
- Superheterodyne (common); ZF/IF 460/10700 kHz; 3 AF stage(s); Export model
- Tuned circuits
- 6 AM circuit(s) 10 FM circuit(s)
- Wave bands
- Broadcast, Short Wave plus FM or UHF.
- Power type and voltage
- Alternating Current supply (AC) / 110-120; 220 Volt
- 3 Loudspeakers
- Wooden case
- from Radiomuseum.org
- Model: Majestic 4006U [Export] - Grundig Radio-Vertrieb, RVF,
- Tablemodel with Push Buttons.
- Dimensions (WHD)
- 540 x 360 x 240 mm / 21.3 x 14.2 x 9.4 inch
The Grundig Majestic model 4006U is the export version of the domestic Grundig "Konzertgerät 4006 Stereo". SAMS Photofact date 10-61, set 551, folder 6 shows for the same chassis the Grundig Majestic models 4006U (as table version) and the consoles with legs: SO2U, SO11U and SO12U. The SW band covers 5.9 to 16 mc. Two loudspeakers have a diameter of 5" the third 7" x 11".
- Literature/Schematics (1)
- Photofact Folder, Howard W. SAMS (Date 10-61, set 551, folder 6)
- Model page created by Ernst Erb. See "Data change" for further contributors.
- Other Models
Here you find 6145 models, 5361 with images and 4150 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Grundig (Radio-Vertrieb, RVF, Radiowerke)
Forum contributions about this model: Grundig Radio-: Majestic 4006U
Threads: 1 | Posts: 2
I have aquired a 4006u. It is a beautiful radio but has some problems, The back and the power cord are missing. Of greater concern the power screw seems to be missing, This is all guess work on my part. There are two tapped holes under the fuse that are marked 110 and 220. In pictures of similar units I can see that there is a plastic capped screw in the 110 hole. I see the connection on the schematic and can see that it does connect either the 110 or the 220. My question is does anyone know about how long the screw is? I don't want to go too long and screw into some vital part and ruin it or too short and not make connection. I am assuming that I can use a regular screw here and that the specific screw is not available. If anyone knows of a source for the plastic capped screw that belongs here i'd be glad to hear of it. I have discovered that the fuse has been covered with aluminum foil so I am currently assuming there are power problems to be fixed once I can connect the power.
Thanks in advance for any help or suggestions you may have.
John Kennedy, 04.Dec.10