• Année
  • 1954/1955
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 19633

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 9
  • No. de transistors
  • Principe général
  • Super hétérodyne (en général); FI/IF 460/10700 kHz
  • Circuits accordés
  • 8 Circuits MA (AM)     11 Circuits MF (FM)
  • Gammes d'ondes
  • PO, GO, OC et FM
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110, 125, 150, 220, 240 Volt
  • Haut-parleur
  • 6 HP
  • Puissance de sortie
  • 15 W (qualité inconnue)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Opus 55/TS - Telefunken Deutschland TFK,
  • Forme
  • Modèle de table avec boutons poussoirs.
  • Dimensions (LHP)
  • 640 x 420 x 280 mm / 25.2 x 16.5 x 11 inch
  • Remarques
  • Regelbare Bandbreite, KW-Lupe;
    Chassis baugleich mit AEG 3084WD.
    See export Versions with and without side speakers.

  • Prix de mise sur le marché
  • 489.00 DM
  • Source extérieure
  • Erb
  • Schémathèque (2)
  • -- Original-techn. papers.

 Collections | Musées | Littérature

 Forum

Contributions du forum pour ce modèle: Telefunken: Opus 55/TS

Discussions: 1 | Publications: 15

Respected Members,

Restoring my Opus 55 TS the new magical eye illuminates lightly. The B + is 40 volt low the normal value. The Selenium rectifier is very old and I replaced its contained with four silicon diodes 1N4007 forming a bridge with four 4.7 nf capacitors in parallel to each diode.  To adjust the B+ value  I put a 220 ohms 10 watts resistors in series with the power transformer.  Now the B + is in normal value and the EM80 glow well. 

But during the first and half minute, after power on the radio, the B + rises to 340-360 volts and slowly reaches the normal value.  I understand that is a characteristic of the Silicon rectifiers and not in the selenium rectifiers. 
This abrupt increase of voltage can be dangerous for other components of the radio as power capacitors, output transformer or output valves?  It is necessary to control this abrupt increase of tension? 

Thanks in advance,
Bruno.

Bruno Gandolfo-Canepa, 15.Feb.06

Weitere Posts (15) zu diesem Thema.