Supra-Selector 37 SB4346GW

Körting-Radio; Leipzig, später Grassau

  • Año
  • 1936/1937
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 2433
    • alternative name: Dietz & Ritter GmbH, Dr.

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 6
  • Principio principal
  • Superheterodino en general; ZF/IF 468 kHz
  • Número de circuitos sintonía
  • 7 Circuíto(s) AM
  • Gama de ondas
  • OM, OL y dos OC
  • Tensión de funcionamiento
  • Red: Aparato AC/DC. / 110; 125; 150; 220; 240 Volt
  • Altavoz
  • Altavoz dinámico (de imán permanente)
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Supra-Selector 37 SB4346GW - Körting-Radio; Leipzig, später
  • Forma
  • Sobremesa apaisado (tamaño grande).
  • Ancho, altura, profundidad
  • 490 x 404 x 305 mm / 19.3 x 15.9 x 12 inch
  • Anotaciones
  • variable Bandbreite. Abstimmanzeige durch Glimmröhre. Spartransformator!!.
  • Peso neto
  • 22 kg / 48 lb 7.3 oz (48.458 lb)
  • Precio durante el primer año
  • 415.00 RM
  • Referencia esquema
  • Lange+Schenk+FS-Röhrenbestückung

 Colecciones | Museos | Literatura

Colecciones

El modelo Supra-Selector 37 es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Körting-Radio;: Supra-Selector 37 SB4346GW

Hilos: 1 | Mensajes: 4

I am having difficulty getting the 6 MHz coil slug adjusted for the K1 SW band. 12 MHz trimmer cap adjusts just fine. But the 6 MHz slug can be pulled out of the coil but the oscillator is still running too low. I have cleaned this coil of all dirt and contaminants.

Are theses coil forms or wire insulation subject to deterioration? I have disassembled and cleaned the Oscillator section and switches a few times. Insured there were no visible damages to the oscillator coil. I changed the oscillator 50 pf (was 62pf) grid capacitor and the G2 to cathode 500pf (was 637 pf) capacitor.

I even tried to align the SW at 12 MHz minus IF but the trimmers did not cover that range.

I am open to any suggestion.

 

Paul E. Pinyot † 2013, 10.May.12

Weitere Posts (4) zu diesem Thema.