radiomuseum.org

01A

Information - Hilfe 
ID = 3654
       
Land:
USA
Marke:
Entwickler: RCA (RCA Victor Co. Inc.); New York (NY) 
Typ:  Triode (Hoch-) Vakuum   Universal 
Identisch mit 01A = 201A = D401A = 201 = ER201A = C509A = C509 = 301A = VT-30 = DC201A_UV = CV750 = 401A_UX = X-201A = MX201A = HF201A_perfectron = TSX201A = LB-201A = T01A = D201A = D-201A = EX201A = S01A = LS201A = FX201A = CX201A = 4600 = RH201A = KD01A = P201A = NU-01A = SX01A = SLX201A = PA201A = G&R201A = NX-201A = ZP201A = BG-201A = RayX-201A = Z201A
Ähnliche
Bauform anders (z.B. Art des Kolbens):
  AX201A ; DX-235 ; EX-1A ; M01A ; UX-201-A_Japan ; UX201A
Austauschbar, kleine Unterschiede mögl.
  01AA ; 38001 ; AX ; A_UX-base ; C-201A
Sockel anders:
  C509_B4
Erste Serie 1925 -- Other type before this -same/similar characteristics - see exchange. as UX201A but "Dome form" 01A in 1932
Vorgänger UX201A   CX301A   GX201A  

Sockel USA-UX-4-Stift-Sockel (2 dick), ab 1924 (Codex=Bo)
Anwender Radio/TV-Empfang etc.
Heizung Uf 5 Volt / If 0.25 Ampere / Direkt / Batterieheizung =
Beschreibung

Aus "Radios von gestern" Seite 210ff:
1920 bringt RCA die ersten Radioröhren auf den Markt, die Hochvakuum-Verstärkerröhre UV201 von General Electric (GE), zusammen mit UV200 als Detektorröhre mit Argon-Gas, auch von GE.

1922 ersetzt GE die UV201 durch die UV201A mit Thoriumfaden. Kurz davor, im Januar nimmt die RCA aber auch die zylindrische UV201 von Westinghouse ins Programm auf!

Ab August 1925 heisst die UV201A mit dem neuen Sockel UX201A. Das war notwendig, um engere Toleranzen für Neutrodyne-Empfänger zu erreichen.

Mit der Einführung der Domform (shoulder/dome), 1932, nennt RCA die Röhre 01A.
Ab 1930 produziert RCA die Röhren selbst - als RCA Radiotron, Inc. Vorher kommt die Produktion von GE und Westinghouse (Mutterfirmen von RCA).

Anzufügen aus Tyne Seite 315 ist noch, dass die Gitterstruktur etc. der UV201A gegen Ende 1923 geändert wurde, um die Steilheit zu vergrössern. Das war dann der Grund der Schwierigkeiten beim Auswechseln von Röhren für Neutrodyne-Empfänger (EE).

 
Text in anderer Sprache (evtl. verschieden)
Abmessungen (BHT)
inkl. Stifte/Spitzli
x 108 x 45 mm / x 4.25 x 1.77 inch
Gewicht 46 g / 1.62 oz
Sammlerpreise 6 Sammlerpreise (nur sichtbar für Mitglieder Radiomuseum.org)
Literatur Essential Characteristics, GE 1973   
Taschenbuch zum Röhren-Codex 1948/49   
Babani, International Radio Tube Encyclopaedia
Tube Tester Data Avo CT160

01a_umgebung.png
01A: MK-Röhrentabelle
Daniel Consales

s_217_g.gif 01A: W.Sprick: Austausch-Röhren-Lexikon 1947
Günther Stabe † 19.8.20

Mehr...

Just Qvigstad
01a_daten.png
01A: Sylvania Rec. Tubes Manual 1944
Daniel Consales

Mehr...
Verwendung in Modellen 4= 1925? ; 2= 1926? ; 1= 1926 ; 7= 1927? ; 2= 1927 ; 3= 1932?? ; 4= 1932? ; 8= 1932 ; 2= 1933?? ; 1= 1934?? ; 4= 1934 ; 1= 1935?? ; 1= 1935? ; 2= 1935 ; 2= 1936 ; 1= 1937?? ; 2= 1937 ; 1= 1940?? ; 2= 1940?

Anzahl Modelle bei Radiomuseum.org bestückt:50


Sammlung von

 
commander_01a_e817.jpg

Mehr...
 

Varianten

Variante in Blau, hergestellt von Arcturus.

Zylindrische Glasversion mit Blechmantel. Vollständige Bezeichnung: M01A. Der Buchstabe "M" erscheint jedoch nicht auf der Röhre, sondern nur auf der Schachtel und den Begleitpapieren. Bitte klicken Sie die Seite der M01A


Forumsbeiträge zur Röhre
01A
Threads: 1 | Posts: 1
Klicks: 8192     Antworten: 0
Short Illustrated History of the 01A (01A)
Konrad Birkner † 12.08.2014
17.Jan.06
  1 RCA

UV200 (Argon-gas filled at 0,05 mm Hg), and UV201 (vakuum) had brass base and tip; 1 amp @ 5 volt filament.

  Marketed by RCA. announced in November 1920 and advertised for sale in December 1920.
----------------------------------------------------------------------------------
UV201A (vakuum) from October 1922, brass base, tipped. 
Filament took .25 anp @ 5 volt.
From mid 1924 on bakelite base, no more tip.
     both types UV201A

----------------------------------------------------------------------------------

The new UX based tubes were throughout untipped and used a Bakelite base.

UX201A
(vakuum) from August 1925; .25 amp @ 5volt, and
UX200A (caesium vapor) from April 1926; .25 amp @ 5 volt.

 UX200A       UX201A

-------------------------------------------------------------------------------------
Cunningham
distributed the same tubes types but under different denomination: C in place of UV  and CX instead of UX. Furthermore the 20x numbers became 30x. 
Consequently C300 = UV200  und  CX301 = UX201.

  Cunningham CX301
-------------------------------------------------------------------------------------
Nomenclature
Soon an abbreviated name came into everydays use for the practically identical tubes having different names. They were simply called the 01  or '01. That can be found even printed on schematics etc. It was kind of a generic name.
Officially this name 01A appeared around 1932 for the shoulder or dome type glass envelopes.

  '01A with "shoulder" (dome type)

RCA had initially no tube manufacturing. They marketed tubes made by Westinghouse or General Electric as a distributor, but under their own brand "Radiotron". Cunningham was also involved in that nearly monopolistic business.
In 1930 RCA eventually established the "RCA Radiotron, Inc." as their own manufacturing subsidiary.
 
Replacement

since the 01A is a perfect functional replacement for a.m. tubes, it is not really an error if it is called for a radio before 1932. But anyway we should always try to state the coincident tube types for the models.

Ref.: Saga of the Vacuum Tube
Photos: Authors collection
 
01A
Ende Forumsbeiträge zur Röhre

[rmxtube-ge, noindex]
  

Datenkonformität Mehr Informationen