• Anno
  • 1956
  • Categoria
  • Radio (o sintonizzatore del dopoguerra WW2)
  • Radiomuseum.org ID
  • 82003
    • alternative name: Grundig Portugal || Grundig USA / Lextronix

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 9
  • Principio generale
  • Supereterodina (in generale)
  • N. di circuiti accordati
  • 9 Circuiti Mod. Amp. (AM)     13 Circuiti Mod. Freq. (FM)
  • Gamme d'onda
  • Onde medie (OM), lunghe (OL), corte (OC) e MF (FM).
  • Particolarità
  • Telecomando (con o senza filo)
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 110-220 Volt
  • Altoparlante
  • 5 altoparlanti
  • Materiali
  • Mobile in legno
  • Radiomuseum.org
  • Modello: 4055/56 - Grundig Radio-Vertrieb, RVF,
  • Forma
  • Soprammobile con pulsantiera/tastiera.
  • Dimensioni (LxAxP)
  • 706 x 444 x 300 mm / 27.8 x 17.5 x 11.8 inch
  • Annotazioni
  • 2 Tasten für UKW, "Fern-Dirigent".
    Drehbare Ferritantenne, Gegentakt-Endstufe.

    Siehe auch Vorgänger Grundig 4055W/3D (noch ohne Anschluss f. Fern-Dirigent) und 4055WF/3D.

    Es existierte auch eine Ausührung 4055W/56/S für den Export nach Schweden.

  • Peso netto
  • 17.6 kg / 38 lb 12.3 oz (38.767 lb)
  • Letteratura / Schemi (1)
  • -- Original-techn. papers.
  • Autore
  • Modello inviato da Gottfried Silberhorn. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello fa parte delle collezioni dei seguenti membri.

 Forum

Discussioni nel forum su questo modello: Grundig Radio-: 4055/56

Argomenti: 1 | Articoli: 2

I am repairing a Grundig 4055W/3D-56 and the MW/LW/SW is working fine, but only the FM is not working. I have replaced the 10 uF elco in the FM detector, but I hear nothing than a little bit noise (with the volume at maximum level). I exchanged the EABC80 and ECC85 and doesn't matter.

When I use a small transistor FM radio to test the local oscillator of the Grundig radio and I tune this at 100.7MHz and I tune the Grundig 4055 to 90 MHz I don't hear nothing on the transistorradio. Even when I turn the dialknob from the beginning to the end of the Grundig, I don' t hear a  signal on my transistorradio.

The voltage on pin1 (anode of first triode) is 145 V, the voltage on pin 6 (anode of second triode) is about 132 V.

Does somebody know if there is a technical explanation of the FM tuner of this radio? What could be the reason that the oscillator is not working.

I use the output of the FM tuner of my Telefunken Opus 7 radio and connect it to the first grid of the Ech81 tube of the 4055 radio. Now I have a good sound, so the mf amplifiers and FM detector works fine and the problem is in the FM tuner of the 4055.

 

Martin Panhuis, 04.Dec.13

Weitere Posts (2) zu diesem Thema.