Meersburg Automatic 125 Stereo

SABA; Villingen

  • Année
  • 1960/1961
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 23456
    • Brand: Schwer & Söhne, GmbH

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 10
  • No. de transistors
  • Principe général
  • Super hétérodyne (en général); FI/IF 460/6750 kHz
  • Circuits accordés
  • 8 Circuits MA (AM)     11 Circuits MF (FM)
  • Gammes d'ondes
  • PO, GO, OC et FM
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110; 125; 150; 220 Volt
  • Haut-parleur
  • 4 HP
  • Puissance de sortie
  • 8 W (qualité inconnue)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Meersburg Automatic 125 Stereo - SABA; Villingen
  • Forme
  • Modèle de table avec boutons poussoirs.
  • Dimensions (LHP)
  • 640 x 395 x 290 mm / 25.2 x 15.6 x 11.4 inch
  • Poids net
  • 20.5 kg / 45 lb 2.5 oz (45.154 lb)
  • Prix de mise sur le marché
  • 599.00 DM
  • Source extérieure
  • Erb
  • Schémathèque (1)
  • -- Original-techn. papers.

 Collections | Musées | Littérature

 Forum

Contributions du forum pour ce modèle: SABA; Villingen: Meersburg Automatic 125 Stereo

Discussions: 12 | Publications: 36

Ich bin an einem Meersburg 125, bei dem der Haltemagnet defekt ist. An der Wicklung misst man 300 Ohm Gleichstrom-Widerstand (anstatt ca. 8k Ohm ... 10k Ohm, wie allgemein gesagt wird). Das Neuwickeln ist nicht einfach, weil der Spulenkörper offenbar geschmolzen ist und sich vermutlich mit den Drähten (angeblich 0.2 mm Durchmesser) auf innigste Weise vereint hat.

Bietet jemand einen Komplettersatz oder einen Ausbau aus einem Altgerät an?

Oder hat jemand eine verlässliches Datenblatt dieser Spule?

 

Nicolin Salis

Pièces jointes

Nicolin Salis, 16.Jul.23

Weitere Posts (3) zu diesem Thema.

Guten Tag allerseits ! habe vor wenigen Tagen dieses Meisterwerk der Technik auf einem Flohmarkt erwerben koennen . Die Funktion ist grundsaetzlich gegeben . Bevor es aber ans Entstauben , Reinigen der Mechanik und generellen Ueberpruefung der Kontakte , Kondensatoren usw geht wollte ich die Radiogemeinde fragen wie man denn die Automatik bei diesem Geraet abschalten kann . Die anderen haben eine eigene Taste , der Saba Konstanz Automatik hat die Abschaltung am Senderdrehknopf...

Mit freundlichen Gruessen

Aichner Simon

Simon Peter Aichner, 12.Sep.22

Weitere Posts (2) zu diesem Thema.

Werte Sammlerkollegen,

bei diesem Gehäuse sind viele Kratzer auf der Oberfläche. Ich suche Rat, wie diese Beschädigungen gemindert oder beseitigt werden können. Komplett Abschleifen und Neulackieren möchte ich nicht. Wer hat Erfahrungen und kann mir helfen?

Vielen Dank

Heinz Lucas

 

 

Heinz LUCAS, 23.Mar.18

Weitere Posts (3) zu diesem Thema.

Der 2µF Elko C89 an Pin 8 der Röhre 7 ECL80 ist im Schaltbild mit falscher Polung eingezeichnet. Der Pluspol muß  an Pin 8 liegen.

Heinz LUCAS, 20.Feb.18

Weitere Posts (1) zu diesem Thema.

Kann man eigendlich in diesem Modell einen UKW-Stereodecoder einbauen? Wenn ich bei meinem die Stereo-Taste drücke, geht das Magische auge aus und der Ton ist weg.

Ralf Roßberg, 09.Jun.15

Weitere Posts (3) zu diesem Thema.

Obviously the output stage (the Beam tetrodes of the 2 x ECL86) is either two separate outputs for Stereo or Push Pull on Mono.

But strangely while tracing the switches on the Schematic (circuit diagram) I find:

  1. St1 is simply the Mono/Stereo lamp. That's OK.
  2. Operating Stereo OR Gram will cut power to the RF tubes/valves (St7 and T1 are in Series to the +4 HT line)
  3. St5 logically connects the two secondaries of Tr2 and Tr3 (Audio outputs) in parallel on mono and disconnects in stereo.
  4. St2 logically switches to AF preamp in Stereo and input of unity Inverter triode driving other output in Mono.
  5. T4 disconnects the Search motor, which makes sense.
  6. T5 disconnects U7 100nF feedback and changes effect of Sp3 to match Sp1 on the 2nd Stereo channel (Sp4 is Speech/Music lamp switch)
  7. T6 switches from Radio to  Tape pin 3 tied to Gram Pin 3 via 47K.
  8. T3 connects to Tape pin 5 (tied to Gram Pin 3 via 47K).
  9. The Audio amp preamps fed from T6 and T3 "common" via a pair of 47K resistors.These "common" points feed Tape pin 4 & 1 via 2M2 & 100K (x22) attenuators.
  10. St6 logically feeds 2nd Gram input to 2nd audio Preamp Triode in Stereo or shorts it to first Preamp in Mono. 
  11. I can't find St3 and St4 used anywhere
  12. I can't find Sp2 anywhere

The Stereo switch is obviously meant to be used to switch between Mono or Stereo Gram. But it also switches off the Radio, But leaving Tape Pin 1 connected to FM or AM detector. In this mode with Stereo pressed and Gram not press the only audio input path is Pin 1 & 5 of Tape socket via 2M2 Resistors.

It doesn't make sense to me that:

  1. T2 is decreasing cathode bias resistor (i.e.More DC Anode Current) when in Gram, not St switch increasing it. The Bias would expected to be switched for lower current in Push Pull Mono and higher in current in Stereo.
  2. I  can't find St3 and St4 being used anywhere.
  3. T3 and T6 connect Tape socket pin 4 to 5 via 2M2 and pin 1 to 3 via 2M2, Though disconnecting the Radio. (T6 to C47 open)
  4. Why Gram Switch T5 rather than St"x" switch?
  5. Are T2 and T5 really the missing St3 and St4? That would make more sense. Are the Schematic labels a mistake? I will check next time I open the set and I'm temped to wire St3 in place of T5 and St4 in place of T2 if the schematic is correct.

[Edit:

Examining the "dots" on the piano key diagram suggests that St3, St4 and Sp2 contacts are not actually fitted on the switch mechanism, hence they have to use T2 and T5. A mistake in specification  of the switch mechanism?]

Any thoughts?

 

Michael Watterson, 25.Feb.12

Weitere Posts (2) zu diesem Thema.

I'm unused to such a "deluxe" German set, so my first confusion was why it didn't come on when I pressed a Piano Key. I felt a bit stupid when I discovered the AUS isn't just Off, but also EIN, On as well. Achieved by a pull switch.

It also took me a little while to realise that unlike the Piano Key sets I'm used to the Mono/Stereo and Music/Speech switches only need a light touch to latch, that with a customary hard press they pop up again.

The two (or four?) thin rocker buttons at the front obviously initiate search up and down the band and if held at extreme left or right drive the dial faster.

The Ferrite rod rotation knob and associated switch seem obvious as does Volume, Tuning, Search/AFC on-off switch and the variable bass and treble controls. Balance control on the rear.

The pair of Class A outputs (Stereo) converting to Class AB (changed Cathode Bias) in Mono Mode is cute.

Is there an Englishoperation manual or is there a German one?

Is the 6.75MHz FM IF unusual? 

Was this model ever intended to have an "add on" Stereo Multiplex Decoder? Obviously not hard to add.

I see this model is listed in a table on the Saba Multiplex Adapator page, using Google to translate:

... Older equipment and the corresponding domestic appliances Freiburg / Meersburg / Freudenstadt 11, the seven-pin connector yet. However, they can also be converted. I myself own a full automatic Freiburg 125 Stereo, in a multiplex adapter was installed 12th ...

So I guess this model wasn't "plug and play" but can be adapted, though wasn't intended.

Michael Watterson, 23.Feb.12

Weitere Posts (2) zu diesem Thema.

It's impressive how the Q, L, M, K, UK keys light!

But the M key isn't lit. It's not obvious to me how to access the bulbs. How do I replace the failed lamp and where do I get a replacement?

Michael Watterson, 23.Feb.12

Weitere Posts (11) zu diesem Thema.

Hallo,

ich habe ein Saba Meersburg Automatik 125 Stereo bekommen welcher aber keine Fuktion hat! Die Betriebsspannung am Netzgleichrichter beträgt 303 Volt ! Wer kann mir helfen den Fehler zu finden? Herzlichen Dank.

Viele Grüße

Udo Held

Udo Held, 19.Oct.11

Weitere Posts (4) zu diesem Thema.

Hallo

Habe jetzt die Automatik soweit in Griff bekommen das sie wieder auf beiden Seiten einwandfrei funktioniert. Habe dafür einige Kondensatoren und eine Diode getauscht. Auch der Abgleich des Steuerfilters stellte kein Problem dar. Leider funktioniert die Endabschaltung nach beiden Seiten immer noch nicht. Kontakte dafür sind keine vorhanden.

Ist es normal das der ton erst nach 10 sec. wiederkommt wenn man die wippen der automatik drückt? sowohl bei ein und auch bei ausgeschalteter Automatik?

Danke nochmals für die bisherigen Tipps

 

Robert Forchert-Mühlbachler, 11.Apr.10

Weitere Posts (2) zu diesem Thema.

Hallo

Mein Problem liegt beim Sendersuchlauf. Nach links funktioniert er einwandfrei sowohl schnell als auch langsam. Nach rechts geht auch schnell und langsam, bleibt aber immer nur auf den gleichen 2 sendern stehn die nicht mal die stärksten sind. Auch die endabschaltung nach li und re funktioniert nicht.

Wenn der suchlauf läuft wird der ton langsam leise und kommt nach dem stehenbleiben auch erst nach 3-10 sekunden wieder. kommt drauf an wie lange der suchlauf läuft.

Robert Forchert-Mühlbachler, 05.Apr.10

Weitere Posts (2) zu diesem Thema.

Eine genaue Beschreibung über Funktion und Reparatur des Sendersuchlaufs ist bei den Schaltbildern zu den Modellen Freiburg 7 und Freiburg 125 hinterlegt.
Mit freundlichen Grüßen
Marc Goeritz

Marc Goeritz, 14.Apr.06

Weitere Posts (1) zu diesem Thema.